NOVOTEST - Coating Thickness Gauge TP-2020: Pilihan Utama di Melaka, Malaysia, Ayer Keroh Carlssoon Technologies (Malaysia) Sdn Bhd

Penerangan

NOVOTEST - Coating Thickness Gauge TP-2020
Brand : Novotest
Model : TP-2020

Product Desription

Coating thickness gauge NOVOTEST TP-2020 is designed for thickness measuring of coatings based on ferrous and non-ferrous metals. Variety of various sensors make it possible of non-destructive testing of protective coatings with a wide thicknesses range. Thickness gauge can also measure next parameters: the depth of grooves and corrosion, surface roughness as well as temperature control, ambient humidity and dewpoint temperature, therefore covering a wide range of tasks by one universal unit (thickness gauge).

Product Features

Measures coating thickness on ferrous (Fe) and non-ferrous (nFe) metals
Automatic sensor detection
Wide range of sensors for different tasks
Selecting units of measure
Storing individual calibrations in probes memory
Average calculation, minimum and maximum indication
High measurement accuracy
Transfer of measurement data to PC via usb
Portability
Large buttons
Enlarged screen
Shockproof housing with a special protective silicone bumper case
Charge control

Technical Specification

Thickness measurement range(depends on probe type)	0 µm … 60 mm
Measured parameter	coating thickness, corrosion depth, roughness, temperature, humidity, dew point temperature
Measuring units	μm, mm, inch, mil
Revision modes	calculation of average, indication of minimum and maximum
PC connection	yes
Menu languages	English, Spanish, French, Russian
Dimensions, mm	122x60x25
Operating temperature range, ° C	-20 … +40 ° C
Batteries	2 AA
Type of connectors of probes	Lemo
Storage of measurement results and PC software (optional)	256
Standards	AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 499, ASTM D 7091, ASTM E 376, ASTM G 12, BS 5599, EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840, ISO 2063, ISO 2178, ISO 2360, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, NF T30-124, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32, ASTM D 1186-B, ASTM D 1400, BS 3900-C5-6B, BS 3900-C5-6A, BS 5411-11, BS 5411-3, DIN 50981, DIN 50984, ECCA T1, ISO 2808-6A, ISO 2808-6B, SS 184159
Time of continuous work hours, not less	20
Weight of electronic unit with batteries, no more, kg	0.2

Specifications of probes for Coating Thickness Gauge NOVOTEST TP-2020

Coatings on steel (dielectric and conductive coatings on ferromagnetic metals and alloys)
Type of probe	Coating thickness measurement range	Measurement accuracy	Dimensions of the probe, mm	Purpose
probe F-0,3	0-300 μm	±(0,03h+0,001) mm	Ø5×40	Measurement of paint, varnish and galvanic coatings
probe F-0,5	0-500 μm	±(0,03h+0,001) mm	Ø 8×15	Measurement of paint, varnish and galvanic coatings
probe F-2	0-2000 μm	±(0,03h+0,002) mm	Ø 10×35	Measurement of paint and varnish coatings
probe F-5	0-5000 μm	±(0,03h+0,002) mm	Ø 18×40	Measurement of paint, varnish and mastic coatings
Coating on the non-magnetic metals (Any (dielectric or metal) coatings on non-ferrous metals and alloys)
probe NF-2	0-2000 μm	±(0,03h+0,002) mm	Ø 12×35	Measurement of anodic-oxide films and paint coatings
Thick coatings on metals (dielectric coatings on metals)
probe M-12	0-12 mm	±(0,03h+0,02) mm	Ø 15×50	Measurement of mastic coatings
probe M-30	0-30 mm	±(0,03h+0,03) mm	Ø 40×50
probe M-60	0-60 mm	±(0,03h+0,05) mm	Ø 70×60
Measurement of surface roughness, Rz (After abrasive blasting pre-painting work)
probe DSH	2-300 μm	±(0,03h+0,002) mm	Ø 18×40	Measurement of surface roughness after sand and shot blasting
Temperature, humidity and dew point
probe DT	-50 … +80 ° C	+ / – 1 ° C	Ø 12×107	Temperature measurement
probe DTVR	Humidity: 0 – 100% Temperature: -50 … 80 °C Dew point: -15 – +40 °C	± 5% ± 1 ° C ± 2 ° C	Ø 50×120	Measurement of temperature, humidity and dew point

Magnetic Properties Chart:

Lebih maklumat tentang Carlssoon Technologies (Malaysia) Sdn Bhd