TREK - Concentric Ring Surface and Volume Resistance Probe
Brand: Trek
Model: 152P-CP-1-CE
Product Descriptions:
The Trek Model 152P-CR-1 Concentric Ring Probe is capable of measuring surface and volume resistance in materials as per IEC or ESDA standards. A three (3) positions switch on the probe selects surface resistance or volume resistance measurements with either a guarded or unguarded outer electrode.
An optional Test Plate Set [CN 17530] consists of two separate plates. A stainless steel conductive plate can act as a second electrode to apply the test voltage to the sample under test and also provides a mini-banana plug connection for a secure ground connection. An insulative plate us utilized as needed. The use of these plates are described in the ESD STM11.12 and in IEC61340-2-3 standards.
The Trek model 152-1 Resistance Meter used with the 152P-CR-1 system, is designed to precisely measure surface resistance on a wide variety of conductive, dissipative, and insulative materials.
The Model 152-1 Resistance Meter employs a measurement technique which conforms to ANSI/ESD Association standards for measuring surface resistance, resistivity and volume resistance and features exceptional measurement accuracy and wide measurement ranges of 103 to 1013 ohms using either a point-to-point probe or the two-point probe. Measured resistance values are clearly displayed on a high-contrast LCD displays Various probes are available and accessory options include a Walking Test Adapter which allows analysis of resistance levels on the human body [STM 97.1].
Product Specifications:
| Measurement Range | 103 to 1013 ohms |
| Probe Electrode Test Voltage | User selectable for 10V or 100V, ±2% |
| Test Current Limit | Limited to less than 13 mA in the 10V range and less than 1.7mA in the 100V range. |
| Model 152P-CR-1 Surface/Volume Resistance Probe | A three (3) position switch on the probe selects performance options |
| Optional Test Place Set | These plates provide additional ESD STM standard options for guarded and unguarded resitance and volume measurements |
| Optional Probe Calibration Fixture | Provides measurement accuracy verification of resistance/resistivity probes. |
