MAHO COMPACT C40-C60 SINGLE CYLINDER HYDRAULIC STEELWORKER TECHNICAL SPECIFICATION
| COMPACT 40 | COMPACT 60 | |||
| Punching | Rated Capacity | mm | 400 | 600 |
| Maximum Capacity | mm | 20 X 15 | 28 X 15 | |
| Diameter X Thickness | mm | 38 X 8 | 38 X 11 | |
| Stroke Length | mm | 32 | 55 | |
| Cycles/min - 16 mm Travel | mm | 23 | 26 | |
| Standard Throat Depth | mm | 175 | 220 | |
| Deep Throat Depth | mm | - | - | |
| Largest Hole (Optional) | mm | 57 | 110 | |
| Working Height | mm | 900 | 940 | |
| Shearing | Flat Bar - Max Thickness | mm | 200 x 13 | 200 x 20 |
| Flat Bar - Max Width | mm | 350 x 8 | 300 x 15 | |
| Angle fl Angle Trim - Max. | mm | 80 x 10 | 80 x 10 | |
| Working Height | mm | 900 | 940 | |
| Angle Cutting | 90 Degree Cut | mm | 80 x 8 | 127 x 12 |
| 45 Degree Mitre (true int . | mm | 50 x 6 | 80 x 8 | |
| Working Height | mm | 1210 | 1140 | |
| Section Cutting | Round / Square | mm | 30/25 | 40/35 |
| Channel / Beam (**)(*) | mm | 76 X 38 | 102 X 51 | |
| T Shape(**)(*) | mm | 38 X 6 | 76 X 10 | |
| Notching | Material Thickness | mm | (*)8 | 10 |
| Width - Rectangle | mm | (*)35 | 42 | |
| Depth - Rectangle | mm | (*)65 | 100 | |
| Depth - V-Shape(*) | mm | (*)55 | (*)60 | |
| Angle Flange - Max. | mm | - | 100 X 10 | |
| Working Height | mm | 900 | 940 | |
| Cornet Notching(*) | Maximum Capacity | mm | - | 150 x 4 |
| Tube Notch(*) | Maximum outside Diameter | mm | 40 | 60 |
| Bending(*) | Plate | mm | - | - |
| Maximum Capacity | mm | 80 X 10 | 150 X 12 | |
| Punching at Notch | Throat Depth | mm | - | 110 |
| Maximum Capacity | mm | - | 20 X 12 | |
| Technical Data | Motor Power | KW | 3KW | 4KW |
| Net Weight | KG | 550KG | 1250KG | |
| Machine Dim. (L X W X H) | CM | 106 X 55 X 148 | 152 X 59 X 170 |
Malaysia
