| MODEL | TPR-720A | TPR-820A | TPR-920A | TPR-1100 | |||
| Dai.of column | 210 | 260 | A | ||||
| Distance from column surface to spindle center , Max | 750 | 850 | 950 | 1100 | D+C | ||
| Distance from column surface to spindle center , Min | 220 | 280 | C | ||||
| Travel of spindle head | 530 | 630 | 730 | 820 | D | ||
| Distance from base surface to spindle end , Max | 1060 | 1210 | 1270 | E | |||
| Distance from base surface to spindle end , Min | 260 | 350 | 470 | F | |||
| Elevating height of Arm | 580 | 640 | 570 | E-F-I | |||
| Effective area of box table | 600×445×380 | 635×520×415 | L×K×H | ||||
| Dimension of base | 1260×640×160 | 1725×715×180 | R×S×Q | ||||
| Taper hole spindle | MT#4 | ||||||
| Stroke of spindle | 220 | 230 | I | ||||
| R.P.M of spindle (rpm x steps) | 88 , 154 , 282 , 455 , 796 , 1500×6 steps | 44-1500×12 steps | |||||
| Feed of spindle (rev. x steps) | 0.05 , 0.09 , 0.15×3 steps | 0.05 , 0.09 , 0.15 ×3 steps | |||||
| Main motor (HP) | 2HP | 3HP | |||||
| Elevating motor (HP) | 1HP | 1HP | |||||
| Coolant equipment (HP) | 1/8 HP | 1/8 HP | |||||
| Machine height from floor (Max.) | 2170 | 2320 | 2530 | M | |||
| Base + column height | 1850 | 2010 | 2000 | G | |||
| Net weight (approx)kgs | 1120 | 1200 | 1250 | 1800 | |||
| Shipping weight (approx)kgs | 1250 | 1340 | 1400 | 1950 | |||
| Shipping dimensions (LxWxH) | 1680×826×2160 | 1680×826×2190 | 1806×864×2210 | 1880×864×2210 | |||
| Capacity | Drilling | Stell | 32Ø | 42Ø | |||
| Cast iron | 50Ø | 55Ø | |||||
| Tapping | Stell | 25Ø | 25Ø | ||||
| Cast iron | 32Ø | 35Ø | |||||
