SMARTMEASUREMENT’s ALMAG-MN is an in-line electromagnetic flowmeter ideal for low flow of conductive liquids of 20 μs/cm or greater. The ALMAG-MN comes in sizes of 6, 8, 10mm tube sizes with process connection of ½” NPT or ½” BSPP.
The ALMAG-MN is designed for low-flow chemical injection or difficult to meter applications with pulsating metering pumps, corrosive fluids, food and beverage applications, etc.
The ALMAG-MN flow tube is available in ceramic, polyethylene or PEEK materials. The flow meter comes with a built-in temperature sensor, an integrated three-line display or in a blind version.
The ALMAG-MN can be used in areas where mechanical meters like turbines or paddle wheels cannot be used due to contamination/particulates in the fluid.
|
Sizes: |
½” npt/BSPP6, 8 or 10mm I.D. |
|
Measuring Range: |
0.01m/s – 10 m/s, bi-directional |
|
Temperature: |
140°F (60°C) for PE, 195°F (90°C) |
|
Accuracy: |
±0.5% of reading (Velocity>=0.5 m/s) > 0.6 or ±3 m/s(Velocity < 0.6 m/s) |
|
Pressure: |
Up to 150 psig (10 barg) |
|
Material : |
Measuring Tube: PE, PEEK or Ceramic |
|
Conductivity: |
must be ≥ 20 μS/cm |
|
Electrode & Grounding: |
Stainless Steel #316L, Hastelloy C |
|
Protection: |
IP 65 |
|
Housing: |
Aluminum (standard) |
|
Ambient temperature: |
-15 ~ 140°F (-25 ~ 60°C) |
|
Cable entry: |
2 X PG11 |
|
Resistance excitation: |
Must be less then 10 Ω |
|
Process Connections: |
G-½” or ½”NPT aluminum (standard), Stainless Steel #316 (optional) |
|
Power Supply : |
24 VDC, ≤ 100mA |
Malaysia
