Penerangan
Devcon 10110 Plastic Steel® is the original metal-filled epoxy putty used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible.
Key Features :
- Bonds to most metals, concrete and some plastics
- Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted
- Excellent resistance to oil, gasoline, water and many chemicals
- Listed under NSN Stock #8030-00-903-6545; #8030-00-962-4430
- Open Time: 45 minutes
- Color: Gray
- Mix Ratio: 2.5:1
Areas of application
- Patching and repairing areas where welding or brazing would be undesirable or impossible
- Repair of worn or fatigued metals
- Patching of castings
- Rebuilding pump and valve bodies
- Rebuilding bearing journals and races
Specification
- Physical State Appearance: Paste
- Color: Dark Gray
- Odor: Slight. odor
- Boiling Point: >500°F (260°C)
- Melting Point: Not determined
- Specific Gravity: 2.8
- Solubility: negligible
- Vapor Density: >1 (air = 1)
- Vapor Pressure: 0.03 mmHg @171°F
- Percent Volatile: 0
- Evaporation Rate: <<1 (butyl acetate = 1)
- pH: Neutral
- Molecular Formula: Mixture
- Molecular Weight: Mixture
- Flash Point: >400°F (204.4°C)
- Flash Point Method: Pensky-Martens Closed Cup
- Lower Flammable/Explosive Limit: Not determined
- Upper Flammable/Explosive Limit: Not determined
- Auto Ignition Temperature: Not determined
- VOC Content: 0 g/L
Lebih maklumat tentang Kinetic Hardware Supply Sdn Bhd
