Durco Mark 3 ISO Self Priming, Overhung, Chemical Process Pump

Durco Mark 3 ISO Self Priming, Overhung, Chemical Process Pump

Kategori: Self Priming Stok Habis
Boleh Dibeli di Laman Web Rasmi
Untuk maklumat lanjut, lawati laman web rasmi kami di absfluidsolution.com

Penerangan

Brands:
Durco

Applications:
Dewatering and Water Supply (mining), Plating, Galvanizing and Other Coatings, Drilling and Production, Renewable Fuel Production, Electronics, Sewage Collection and Treatment, FPSO, Shipping, Acid Transfer, Food Processing, Slurry Processing, Agriculture, HVAC, Solvents, Automotive, Heavy Oil, Oil Sands and Shale, Volatile Organic Compounds, Auxiliary (chemical), Hydraulic Press (metals), Waste Processing, Auxiliary Services (power), LNG, Water Supply and Distribution (water), Bleach Chemical (pulp and paper), Leaching Acid, Water Supply and Treatment (oil and gas), Caustic and Chlor-alkali, Water Treatment, Chemical and Liquor (pulp and paper), Nuclear Service, Coatings (pulp and paper), OEM, Construction, Offsites and Waste Treatment, Cooling Water (metals), Pharmaceuticals, Desalination, Polymers

Industries:
Pulp and Paper, Water Resources, Chemical Processing, Primary Metals, Mining, Oil and Gas, Power Generation, General Industries

Standards:
ISO

One-piece Casing has large priming chamber, air separator and volute in one integral component, keeping components to a minimum.

Reflux Priming Principle eliminates the need for internal valves and external priming devices.

Standard Semi-open Impeller delivers high efficiency performance, provides low NPSHR and offers good solids handling.

Run Dry Capability allows for minimal supervision.

SealSentry Seal Chambers extend seal life and provide advanced self-flushing capability.

Two-piece, Ductile Iron Bearing Housing is designed for safety, strength, interchangeability and retrofit capability.

External Micrometer Impeller Adjustment Mechanism accurately sets impeller clearance in 20 seconds, in the shop or the field.

IPS Beacon power end condition monitor provides a visual signal that a current or past alert condition has occurred.

Back Pull-out Design allows removal of rotating element without removing casing, piping or motor.

Operating Parameters

  • Flows to 100 m3/h (440 gpm)
  • Heads to 100 m (330 ft)
  • Pressures to 25 bar (365 psi)
  • Temperatures from -80°C (-110°F) to 400°C (752°F)

Lebih maklumat tentang ABS Engineering & Trading Sdn Bhd
ABS Engineering & Trading Sdn Bhd
ABS Engineering & Trading Sdn Bhd Pembekal Pam Selangor, Membekal Peralatan Kejuruteraan, Sistem Cairan Di Malaysia, KL, Johor Bahru (JB), Penang ~ ABS Engineering & Trading Sdn Bhd