Heavy Duty Leveling Machine Feet｜Before the installation, the mechanical foot please do not tapped hole.
Automatic adjust the horizontal angle. Correctly guide the machine feet to completely fit the ground to let the mechanical stable running. When machine loading on the heavy-duty leveling feet can use open-end wrench to adjust the machine height & horizon. (please refer to photo below)
To prevent from the vibration and improve the work environment when the machine is on. To decrease the vibration between floors when the machine is running. To ensure the precision of machinery in order to prevent from the slipping out, shockproof, non-slip, wear-resistant, oil-resistant.
Application: Gantry, injection machine and industrial processing equipment.
Material-Base: FC-250 Powder coating (Silver)
Material-Bolt: S45C with heat treatment and coating with Manganese phosphate
Material-Cushion: Chloroprene Rubber (Black)
Material-Socket Set Nut: FCD45 Powder coating (Silver)
Item No.
Type
Bolt Material / Finish
Base Material / Finish
Dimensions
Max. Thickness of Machine Support
Load Capacity
(kgf)
Weight
(kg)
Size of Screw
(M)
Bolt length
(L)
H
H1
Base DIA
(D)
With socket set nut
S45C / Manganese phosphate
FC-250 / Powder coating (Black)
M48*P2.0
110
161
75
150
55
1100
3.8
With socket set nut
S45C / Manganese phosphate
FC-250 / Powder coating (Black)
M48*P2.0
200
251
75
150
145
1100
3.9
Without socket set nut
S45C / Manganese phosphate
FC-250 / Powder coating (Black)
M48*P2.0
110
151
65
150
55
1100
3.6
Without socket set nut
S45C / Manganese phosphate
FC-250 / Powder coating (Black)
M48*P2.0
200
241
65
150
145
1100
3.7
※Place the level washer on the glide then lower down machine slowly. (Before the installation, the mechanical foot please do not tapped hole.)
※Insert the bolt through the machine into the glide then place the nut and washer from the top.
※To adjust machine to its height with the handle by the wrench(26mm).
※To tie the nut and washer when the adjustment is done accurately.
※After locking the socket set nut that is under handle with 3" hook wrench, assembly is finished.
.jpg)
.jpg)
.png)
Lebih maklumat tentang CLINCH & GRIP FASTENER SDN. BHD.
