Penerangan
Saw Blade Sharpener and Polishing Machine (Dry) ID35011
Method of operation:
First, loosing the fascia, then adjust the angle of grinding blade and fasten.
Second, adjusting of center axle.
Rotating the center axle to the grinding blade.
Pushing the center axle to the right.
Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth.
Rotating the rotation table to ensure the angle of grinding blade.
The cross angle between the grinding surface and work surface is about 5.
Third, adjusting of positioning assembly.
Adjusting the saw blade to the best grinding position, rotating the positioning frame and fascia.
Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw.
Fourth, adjusting the center axle to the same gap of grinding quantity to the right.
Last, when all the parts are fastened, the saw blade supported with hand will be grinded.
*There are options for walk-in purchases.
*We always try to keep the item in stock all the time.
*Knight Auto is the real owner of the above image.
=========================================
Contact Information:
Balakong:
016-6616801(whatsapp)
603-89623888
Setapak:
603-40219399
Gombak:
603-40318686(whatsapp)
Kajang:
016-6613186(whatsapp) Tel:017-3691038
Knight Auto Sdn Bhd (Since 1999)(476359-M)
A Wholly-Owned Subsidiary of Lim Seong Hai Capital Berhad
http://www.knightauto.com.my
=========================================
Malaysia
