Penerangan
The rotary arm wrappers are mainly used for the high speed packaging/logistic system. according to different packaging line, the Rotary Arm Wrapper can be designed for loads small or big, light or heavy.
It refers to rotate the goods around the rotary arm, thereby achieving wrapped the goods. All T-series wrappers can be wrapped with R-Series wrappers. In addition, the wrapping methods is more suitable for lighter, higher-level and unstable post-palletizing products or overweight goods. Flexible installation of the machine can be placed on the wall, can also be used to support fixed; and can be connected with the transmission line as needed to meet the demands of assembly line operations.
Control system
-
PLC control system
-
Photo-eye pallet height sensor
-
0-9 separate top, bottom & up-down wrap count selectors
-
Reinforce wrap allow more wrap on same location
-
Film Tension Control adjustment on the panel
-
3-15RPM variable carriage up/down speed
-
Cycle pause capability
-
Flash light for machine in operation
-
Rotary arm stop by safety bumper and reflective photo-eye
Arm(Mast)drive
-
Slewing Bearing drive system
-
Soft start/soft stop
-
Go back to the original start position after wrap cycle finished
Film carriage
-
Powered pre-stretch system up to 300% to the film length (Pre-stretch ratio can be customized)
-
Carriage door opens for effortless film change
-
Adjustable film feeding speed by separate AC Drive Motor
-
Rotating Power slip ring provide power required for carnage drive on rotary arm
Conveyor
-
Heavy structural steel frame construction
-
Heavy duty conveyor guards
-
Adjustable leg height
-
Different roller diameters and roll spacing available
-
Conveyor speed: 12m per min (other speed available)
Auto film tail cut & wipe system
-
Pneumatic damps grab the film end after the wrapping finishes
-
Hot wire film cut
-
Pneumatic brush activate
Option
-
Safety fence
-
Packing height: 2400mm, 2800mm
Technology Data
Max load size(mm) : 1200(L) X1300 (V/) X2200 (H)
Packing efficiency: 30-40load/h base on load
Arm speed: 3-15rpm
Power 2.0 kw 220V 50Hz 1 Phase
*Machine can be customized upon request
Lebih maklumat tentang NuPon Technology
Philippines
