Yokogawa WT500 Mid-Range Power Analyzer
The WT500 Power Analyzer excels at single- and three-phase power measurements. Standard features include a color TFT display and USB interface for communications and memory. The instrument has a basic power accuracy of 0.1%, maximum inputs of 1000 V, 40 A and a measurement bandwidth of DC to 100 kHz.
Intuitive control by using cursor keys in four different directions.
To reduce setting errors, menus display settings in order of relative importance in order.
Two USB ports for peripherals are installed for direct data saving (up to 1 G byte) in USB memory at shortest intervals.
The saved data can be opened in applications such as Excel.
* Excel is a registered trademark of Microsoft Corporation in the U.S.A.
In addition to numerical data, the WT500 can display input signal waveforms and trends (time variation of numerical data).
Bar graph display and vector display are also available with the harmonic measurement (/G5) option.
*1 Waveforms of up to approximately 5 kHz can be displayed.
*2 Excludes single-phase models.
Split screen display for numerical values and waveforms is not available.
|
Two efficiency calculations can be set by selecting input elements or output elements from a list. |
Example: η1 = PΣ/P1 x 100% η2 = PΣ/P2 x 100% |
Only necessary items within the measured data like voltage, current, and power can be saved in USB memory in binary or CSV format (up to 1 GB).
Files saved in CSV format can be opened in general-purpose applications such as Excel to allow displaying of data in graphs.
In addition to integration functions of active power (WP), current (q), reactive power (WQ), and apparent power (WS), a new feature provides measurement of bought and sold watt hours. Also, average active power can be calculated over an integration interval.
This feature is useful for evaluating the power consumed by intermittent-control instruments in which the power value fluctuates. Average active power is calculated by using user-defined settings.
GP-IB communication enables you to control the WT500 or transfer data from a PC.
Data can be transferred via Ethernet* communication.
It enables file transfers using an FTP server.
* 100BASE-TX
Current can be measured by using current clamps without disconnecting power supply wiring (voltage output type). By setting an external current sensor conversion ratio, it can support various types of current clamp-on probes.
By connecting to a monitor, you can create large displays of numerical values and waveforms. This function is convenient for simultaneously confirming data on multiple monitors, or to check data remotely.
This function enables simultaneous measurement of normal and harmonic data. Harmonic components of up to the 50th order can be measured. With the WT500 you can simultaneously confirm voltage, current, and the distortion factor (THD) as well as measure the distortion factor without switching modes.
 |
 |
|
| Harmonic Dual List | THD measurement |
This function allows you to calculate individual phase voltages and phase currents from the line voltages and phase currents measured in a three-phase, three-wire (3P3W) system. The phase voltage can be calculated from the line voltage measured with the three-phase, three-wire (3V3A) method. This is useful when you want to determine the phase voltage in a DUT with no neutral line by using the three-phase, three-wire (3V3A) method.
Note: This function cannot be installed on products with only one element.
In addition to the standard two channels of frequency measurement, an option is available for frequency measurement on all channels. This option provides frequency measurement of voltage and current on all channels with input elements 1 through 3 installed.This is necessary when you want to measure voltage and current frequency from the instrument's I/O as well as voltage and current frequencies of multiple items under test at the same time.
Note: This function cannot be installed on products with only one input element.
Example of basic characteristics showing the WT500's high precision
Connection for the Measurement Cables and Adapters
| Product | Part no. | Specifications | Order quantity |
| Output connector | B8200JQ | D-SUB 9-pin, with 2 screws | 1 |
| Load resistors | B8200JR |
10 Ω, 0.25 W x 4 Connect 4 in parallel to set resistance to 2.5 Ω. |
1 |
Connection Diagram for Clamp-on Probe
*Don't connect and use the current input terminal and EXT terminal simultaneously.
-
For connection the external input of the WT3000 to the current sensor.
Length: 50cm
AC/DC current sensors capable of highly accurate measurement starting in DC range.
Safety-terminal-binding-post adapter. Use for circuits having voltage levels no greater than 42 V.
Special AC-Input Clamp-on Probes for Large-current Hot Line Measurement
Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.
For conversion between BNC and female banana plug
Applicable for DL750/DL750P, SL1000 & SL1400.
Screw-fastened adapters. Two adapters in a set. 1.5 mm Allen Wrench.
Malaysia
