The Ashcroft® LP pressure switch is designed for use on applications requiring high reliability, safety and accuracy. Its straight forward design allows for easy field installation and calibration. The LP pressure switch is ideal for pressure control, safety shutdown or alarm operations where two independent set points or adjustable deadbands are required.
Process Market:
Refineries
Chemical and Petrochemical Plants
Pulp and Paper Mills
Power Plants
Steel Mills
Water and Sewage Treatment Facilities
Industrial Market:
Pumps, Compressors and Turbines
Dairies and Breweries
Boilers and Burners
Reverse Osmosis Systems
Filters and Presses
Paint Spraying Equipment
Specialized OEM Equipment
Medical and Life Sciences Market:
Pharmaceutical Plants
Setpoint Repeatability (Accuracy)
±1% of span (Additional setpoint shift of ±1% of range per 50°F from initial setpoint set at 70°F typical)
Setpoint
Single setpoint, adjustable deadband
Single setpoint, fixed deadband
Two independent setpoints, fixed deadband
Deadband
Fixed or adjustable
Enclosure Ratings
NEMA 4X / IP66
Enclosure Material
Epoxy coated aluminum
Pressure Connection
1/4 NPT Female
1/2 NPT Female
1/4 NPT Female and 1/2 NPT Male Combination
Electrical Termination
½ NPT Female, M20 X 1.5 (OPT.)
Diaphragm/Actuator Material
Buna-N®, Teflon®, Viton®, 316L stainless steel, or Monel®
Pressure Ranges
Vacuum to 3,000 psi
Ambient Temperature Range
–20°F to 150°F (–28°C to 65°C)
Process Temperature
0°F to 150°F (Buna N or Teflon diaphragm)
0°F to 300°F (Stainless steel or Monel diaphragm)
20°F to 300°F (Viton diaphragm)
