FUJI ELECTRIC ULTRASONIC FLOWMETER S-Flow : Pilihan Utama di Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) HSA ASIA SDN BHD

Specifications

Integral Ultrasonic Flowmeter S-Flow <FSZ>: Specifications Main unit type Type Pipe diameter FSZ08 8A, 10A FSZ15 15A, 20A FSZ25 25A, 32A Scroll scrollable Configuration Integrated flow transmitter and detector Mounting method Clamp-on type Measurement method Transit-time measuring method Fluid to measure Homogenous fluids where ultrasonic signals can be transmitted Measurement range 0 to ±5 m/s (Min. 0 to ±0.2 m/s) Accuracy Velocity 1 m/s to 5 m/s: ±2% of rate Velocity less than 1 m/s: ±0.02 m/s Required straight pipe length Upstream 10D or more; Downstream 5D or more (D: Pipe inner diameter) Pipe materials Metals (stainless steel, steel, copper) Plastics (PVC, PP, PVDF) Piping thickness 1.2 mm to 4.9 mm Fluid temperature -15 to +85°C (Can vary depending on ambient temperature) Response time: 0.5 seconds Output signal 4 to 20 mA DC: 1 point Contact: 2 points Display LED 4-digit 2-row display Degree of protection IP65/IP67 Ambient tem- perature -15 to +60°C Ambient humidity 95%RH or less Power supply and power consumption 20 to 27.5 V DC, 2.5 W or less Mass FSZ08: 400 g FSZ15: 500 g FSZ25: 600 g Temperature measurement (Optional) Pipe surface temperature measurement

Penerangan

Easy Installation, Space Savings

Flow rate is “visualized” using our long-cultivated ultrasonic technologies.
Contributes to energy savings and production process solutions.

Easy Clamp-on type by simply tightening 4 screws.
No need for pipe modification.
Integrated detector and flow transmitter for space savings.
Built-in temperature sensor enables simultaneous measurement of flow rate and temperature (Optional).