| MODEL |
UNIT |
JN-T500 |
| TRAVEL |
X Axis |
mm (inch) |
500 (19.7) |
| Y Axis |
mm (inch) |
400 (15.7) |
| Z Axis |
mm (inch) |
330 (12.9) |
| Spindle Nose To Table |
mm (inch) |
150-480(5.9-18.9) |
| Spindle Centre To Solid Column Surface |
mm (inch) |
430 (16.9) |
| TABLE |
Working Area |
mm(inch) |
650*400 (25.6*15.7) |
| Max.Loading |
kg |
350 |
| T-Slots (No.*Width*Pitch) |
mm (inch) |
3*14*125 (3*0.5*4.9) |
| SPINDLE |
Tool Shank |
- |
BT30 |
| Speed |
rpm |
12,000 (OPT15,000) |
| Transmission |
- |
Direct Drive |
| Bearing Lubrication |
- |
Grease |
| Cooling System |
- |
Oil Cooled |
| Spindle Motor Max.Rating |
kw(HP) |
7.5 (10) |
| Axis Motor Max.Rating (MITSUBISHI) |
kw |
1.5/1.5/3.0 |
| Axis Motor Max.Rating (FANUC) |
kw |
1.8/1.8/2.5 |
| FEED RATES |
Rapids On X/Y/Z Axis |
m/min |
60/60/60 |
| Max.Cutting Feedrate |
m/min |
12/12/12 |
| TOOL MAGAZINE |
Tool Storage Capacity |
pcs |
21 |
| Type Of Tool (Optional) |
type |
BT30 |
| Max.Tool Diameter |
mm(inch) |
60 (2.3) turret |
| Max.Tool Weight |
kg |
3 |
| Max.Tool Length |
mm(inch) |
250 (9.8) turret |
| AVG. CHANGING TIME (ARM) |
Tool To Tool |
sec |
0.35 (60HZ) |
| Air Source Required |
kg/cm2 |
6 up |
| ACCURACY |
Positioning (VDI3341) |
mm (inch) |
0.01 (0.0004) |
| Repeatability |
mm (inch) |
0.005 (0.0002) |
| DIMENSION |
Machine Weight |
kg |
5,000 |
| Power Source Required |
KVA |
20 |
| Shipping Floor Plan (L*W*H) Water Tank And Chip Conveyor Not Included |
mm (inch) |
1,800*2,100*2,200 (70.8*82.7*86.6) |
| Floor Plan (L*W*H) |
mm (inch) |
1,800*2,600*2,500* (70.8*102.4*98.4) |
.png)
Malaysia
