KENNEDY Throwaway Cutter, Short, 4mm, Cobalt High Speed Steel, TiCN, M35 / Model: KEN0625120K: Pilihan Utama di Malaysia, Melaka, Selangor, Kuala Lumpur (KL), Johor Bahru (JB), Sarawak ALLIANCE SUPPLIES SDN BHD

Penerangan

Brand	Kennedy
Chuck Clearance	12.5mm
Cutter Diameter	4mm
Cutting Direction	Right Hand
ean	5036140093010
eclassCode	21010500
End Mill Type	Slot Drill
Finish/Coating	TiCN
Flute Length	6.5mm
Length Type	Short
Material	Cobalt High Speed Steel
Material Application	Aluminium Aluminium Alloys Cast Iron Non-Ferrous Metals Steel
Material Grade	M35
Milling Application	End Milling Slotting
Number of Flutes	3
Overall Length	32.5mm
Plunge Type	Centre Cutting
Shank Diameter	6mm

Short Series - Metric - TiCN Coated
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.

Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.
*Except: 1mm cutters, 2mm and 1/16'' ball nose cutters, all of which have two flutes.

Metric Tolerances:
Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020.

Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

Lebih maklumat tentang ALLIANCE SUPPLIES SDN BHD