Penerangan
Description
Despite the high moment load of the base jaws, this sealed 3-finger centric gripper meets the requirements of IP67 and does not permit the ingress of any substances from the working environment into the interior of the component.
Field of application
The gripper is ideally suitable for handling of rough or dirty workpieces. Its field of application extends from the loading and unloading of machines, such as in the case of sanitary blocks, grinding machines, lathes or milling machines, to handling tasks in painting plants, in powder-processing or underwater.
Advantages – Your benefits
Robust interior multi-tooth guidance
for the precise handling of different workpieces
Lip seal at the outside round guidance
for permanent, secure gripper sealing
High maximum moments possible
suitable for using long gripper fingers
Sealed 3-finger centric gripper
complies to IP67 requirements despite a high moment load
Fastening at one gripper side in two screw directions
for universal and flexible gripper assembly
Maximum gripping forces at a compact design
for a wide range of applications
Air supply via hose-free direct connection or screw connections
for flexible pressure supply in all automated systems
Compact dimensions
for minimal interfering contours in handling
Options and special information
Gripping force maintenance version AS/IS
The mechanical gripping force maintenance version ensures minimum gripping force even in the event of a pressure drop. In the AS/S version this acts as a closing force, in the IS version as an opening force.
Power booster version KVZ
if higher gripping forces are required
ATEX version EX
for explosive environments
Additional versions
Various options can be combined with each other. Numerous additional options are also available – just tell us what your task is!
Integrated air purge connection
impedes the ingress of dirt into the inside of the gripper
Please note that to achieve an IP 67 protection class, the gripper requires an additional hose for ventilation or a switchable air purge connection. For detailed information, please refer to the assembly and operating manual. Alternatively, a sinter filter (supplied) mounted on the air purge connection can prevent the penetration of dirt particles > 0.12 mm. However, this reduces the protection class to IP 54.
Lebih maklumat tentang SK - TEC Automation & Engineering Sdn Bhd
