The ultrasonic spray cleaning machine carries out ultrasonic and spray cleaning for stencil
The machine is composed of frame, spray system, ultrasonic system, rinsing system, lifting mechanism, drying system and water circulation filtration system
The machine is mainly powered by electricity. Manually put the stencil into the universal fixed clamping device in the cleaning room. After setting the spray, ultrasonic, drying and other relevant parameters in the touch screen, press the start button, and the stencil will be automatically sprayed, ultrasonic cleaned, rinsed and dried. When the set cleaning process is finished, it will automatically stop running and reset, so as to realize the next workflow
◆Innovative patent design, near touch ultrasonic combined with spray cleaning, no need to soak the stencil
◆The ultrasonic source is 1-2.5mm away from the stencil and the cleaning fluid flows through it and scans up and down to avoid blind area
◆In the process of lifting, the screen plate is quickly dried by high-pressure air nozzle, which solves the bottleneck of water-based cleaning and drying
◆Fast and efficient cleaning of micro printing holes and solder paste in printing area
◆Solder paste cleaning cycle less than 10 minutes
◆PLC full automatic control, dual program setting mode, button type operation is simple, safe and reliable, easy to maintain
◆Design and configure circulating filtration system for MPC cleaning technology, low operation cost and environmental protection
◆Maximum stencil size: 736mm*736mm*40mm (length * width * thickness)
◆Minimum stencil size: 550mm * 500mm * 30MM (length * width * thickness)
|
Machine Dimension（mm） |
L1300mm*W850mm*H2130mm |
|
Max clean scope |
740mmX740mmX40mm |
|
Clean tank volume |
30L |
|
Rinse tank volume |
30L |
|
Air pressure |
0.5-0.7Mpa |
|
Spray pressure |
0.15-0.3Mpa |
|
Max power |
10KW |
|
Voltage/frequency |
380V/50HZ |
|
Ultrasonic/frequency |
1.5KW/40KHZ |
|
Weight |
About 400KG |
|
Solvent recommended |
Water based solvent |
Malaysia
