A vertical multistage pump is a centrifugal pump containing two or more impellers. The impellers may be mounted on the same shaft or different shafts, but for the majority of pumps, they are on the same shaft. The fluid flows into the inlet of the pump casing where it flows into the eye of the impeller.
Typical Applications
> Municipal Water Supply
> Domestic Water Supply
> Boiler Feed and Condensate Water System
> Cooling Water System
> Irrigation and Dewatering
> Fire Fighting
> Washing Plants and Washdown
Features
> Close coupled vertical multistage centrifugal pump with all parts are made up of
stainless steel 304. (Stainless steel 316 and 316L are available on request).
> For suction and discharge bottom casing material, cast iron and stainless steel are
available.
> Standard motor supplied as:
IEC standard, 50Hz, single phase 220V-240V or three phase 380V-415V, 2900RPM,
aluminum casing, IP55, class F. (Single phase motor is available up to 2.2kW only).
> Maximum ambient temperature: +40°C
> Liquid temperature range:
Standard Design : -15°C to +90°C (Max.)
Hot Water Design : -15°C to +120°C (Max.)
> Minimum suction pressure:
According to NPSH, add 0.5m water head.
> Capacity is up to 240m³/hr.
> Pressure head is up to 305m. Features
> Close coupled vertical multistage centrifugal pump with all parts are made up of
stainless steel 304. (Stainless steel 316 and 316L are available on request).
> For suction and discharge bottom casing material, cast iron and stainless steel are
available.
> Standard motor supplied as:
IEC standard, 50Hz, single phase 220V-240V or three phase 380V-415V, 2900RPM,
aluminum casing, IP55, class F. (Single phase motor is available up to 2.2kW only).
> Maximum ambient temperature: +40°C
> Liquid temperature range:
Standard Design : -15°C to +90°C (Max.)
Hot Water Design : -15°C to +120°C (Max.)
> Minimum suction pressure:
According to NPSH, add 0.5m water head.
> Capacity is up to 240m³/hr.
> Pressure head is up to 305m.
Malaysia
