|
Model No. |
CYC6030-F2NN-ND-P1 |
CYC6030-F2NN-ND-P2 |
CYC6050-F2NN-ND-P1 |
CYC6050-F2NN-ND-P2 |
CYC6075-F2NN-ND-P1 |
CYC6075-F2NN-ND-P2 |
||
|
Mechanical Spec. |
Table Size (mm) |
60 X 60 |
||||||
|
Travel Stroke (mm) |
30 |
50 |
75 |
|||||
|
Drive Type |
Ball screw Ø8 lead 1 mm |
Ball screw Ø8 lead 2 mm |
Ball screw Ø8 lead 1 mm |
Ball screw Ø8 lead 2 mm |
Ball screw Ø8 lead 1 mm |
Ball screw Ø8 lead 2 mm |
||
|
Rail |
Circular Linear Ball Guiding |
|||||||
|
Stage Material / Surface Treatment |
Carbon Steel / Nickel Plating |
|||||||
|
Main Unit Weight (Kg) |
2.58 | 2.66 | 2.88 | |||||
|
Coupling |
FAMCS11.6-5*5 |
|||||||
|
Accuracy Level |
NStandard grade |
|||||||
|
Wiring Method |
NGMT Standard |
|||||||
|
Precision Spec. |
Resolution (Pulse) (µm) |
5 (Full) 2.5 (Half) |
10 (Full) 5 (Half) |
5 (Full) 2.5 (Half) |
10 (Full) 5 (Half) |
5 (Full) 2.5 (Half) |
10 (Full) 5 (Half) |
|
|
Max. Speed (Full Step) (mm / sec) |
20 |
40 |
20 |
40 |
20 |
40 |
||
|
Positioning Presion (µm) |
15 |
|||||||
|
Repeatability Precision (µm) |
± 1 |
|||||||
|
Load Capacity (Kgf) |
12 |
|||||||
|
Missed Step (µm) |
3 |
|||||||
|
Parallelism (µm) |
20 |
|||||||
|
Dynamic Straightness (µm) |
3 |
|||||||
|
Dynamic Parallelism (µm) |
10 | |||||||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
2-phase stepper / & 28 double shafts |
|||||
|
Brand / Model |
GMT / 2MS-N28D32A |
|||||||
|
Driver Brand / Model |
GMT / GTR22G-D (Additional options) |
|||||||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
||||||
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|||||||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
||||||
|
Limit Sensor |
||||||||
|
Origin Approximation Sensor |
N / A |
|||||||
|
Power Voltage |
24V ± 10% |
|||||||
|
Control Output |
NPN open collector output under 24V 8mA |
|||||||
|
Output Control |
Testing (sensing)output transistor OFF (closed) |
|||||||
| System Configuration Diagram |
|
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor0Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
|
| Axis Definition |
|
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor0driver Reference Table |
|
|
|
|
Malaysia
