Guide- Circular linear ball guiding, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
Material-Stainless Steel, Carbon Steel
|
Model No. |
CXC8030-S2PN-CD-P1 CXC8030-F2PN-CD-P1 |
CXC8030-S2PN-CD-P2 CXC8030-F2PN-CD-P2 |
CXC8050-S2PN-CD-P1 CXC8050-F2PN-CD-P1 |
CXC8050-S2PN-CD-P2 CXC8050-F2PN-CD-P2 |
CXC8075-S2PN-CD-P1 CXC8075-F2PN-CD-P1 |
CXC8075-S2PN-CD-P2 CXC8075-F2PN-CD-P2 |
||
|
Mechanical Spec. |
Table Size (mm) |
80 X 80 |
||||||
|
Travel Stroke (mm) |
30 |
50 |
75 |
|||||
|
Drive Type |
Ball screw Ø8 lead 1 mm |
Ball screw Ø8 lead 2 mm |
Ball screw Ø8 lead 1 mm |
Ball screw Ø8 lead 2 mm |
Ball screw Ø8 lead 1 mm |
Ball screw Ø8 lead 2 mm |
||
|
Rail |
Circular Linear Ball Guiding |
|||||||
|
Stage Material / Surface Treatment |
SStainless Steel / Nickel Plating FCarbon Steel / Nickel Plating |
|||||||
|
Main Unit Weight (Kg) |
1.79 | 1.86 | 2.03 | |||||
|
Coupling |
FAMCS11.6-5*5 |
|||||||
|
Accuracy Level |
PPrecision grade |
|||||||
|
Wiring Method |
NGMT Standard |
|||||||
|
Precision Spec. |
Resolution (Pulse) (µm) |
2 (Full) 1 (Half) |
4 (Full) 2 (Half) |
2 (Full) 1 (Half) |
4 (Full) 2 (Half) |
2 (Full) 1 (Half) |
4 (Full) 2 (Half) |
|
|
Max. Speed (Full Step) (mm / sec) |
20 |
40 |
20 |
40 |
20 |
40 |
||
|
Positioning Presion (µm) |
5 |
7 |
||||||
|
Repeatability Precision (µm) |
± 0.5 |
|||||||
|
Load Capacity (Kgf) |
18 |
|||||||
|
Missed Step (µm) |
1 |
|||||||
|
Parallelism (µm) |
20 |
|||||||
|
Dynamic Straightness (µm) |
2 |
|||||||
|
Dynamic Parallelism (µm) |
10 | |||||||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / & 28 double shafts |
|||||
|
Brand / Model |
SANYO / SH5281-7211 |
|||||||
|
Driver Brand / Model |
Please refer to reference table |
|||||||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
||||||
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|||||||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
||||||
|
Limit Sensor |
||||||||
|
Origin Approximation Sensor |
N / A |
|||||||
|
Power Voltage |
24V ± 10% |
|||||||
|
Control Output |
NPN open collector output under 24V 8mA |
|||||||
|
Output Control |
Testing (sensing)output transistor OFF (closed) |
|||||||
|
Model No. |
CXC80100-S2PN-CD-P1 CXC80100-F2PN-CD-P1 |
CXC80100-S2PN-CD-P2 CXC80100-F2PN-CD-P2 |
CXC80150-S2PN-CD-P2 CXC80150-F2PN-CD-P2 |
CXC80150-S2PN-CD-P4 CXC80150-F2PN-CD-P4 |
CXC80200-S2PN-CD-P2 CXC80200-F2PN-CD-P2 |
CXC80200-S2PN-CD-P4 CXC80200-F2PN-CD-P4 |
||
|
Mechanical Spec. |
Table Size (mm) |
80 X 80 |
||||||
|
Travel Stroke (mm) |
100 |
150 |
200 |
|||||
|
Drive Type |
Ball screw Ø8 lead 1 mm |
Ball screw Ø8 lead 2 mm |
Ball screw Ø8 lead 2 mm |
Ball screw Ø8 lead 4 mm |
Ball screw Ø8 lead 2 mm |
Ball screw Ø8 lead 4 mm |
||
|
Rail |
Circular Linear Ball Guiding |
|||||||
|
Stage Material / Surface Treatment |
SStainless Steel / Nickel Plating FCarbon Steel / Nickel Plating |
|||||||
|
Main Unit Weight (Kg) |
2.2 | 2.5 | 2.78 | |||||
|
Coupling |
FAMCS11.6-5*5 |
|||||||
|
Accuracy Level |
PPrecision grade |
|||||||
|
Wiring Method |
NGMT Standard |
|||||||
|
Precision Spec. |
Resolution (Pulse) (µm) |
2 (Full) 1 (Half) |
4 (Full) 2 (Half) |
4 (Full) 2 (Half) |
8 (Full) 4 (Half) |
4 (Full) 2 (Half) |
8 (Full) 4 (Half) |
|
|
Max. Speed (Full Step) (mm / sec) |
20 |
40 |
40 |
80 |
40 |
80 |
||
|
Positioning Presion (µm) |
10 |
15 |
||||||
|
Repeatability Precision (µm) |
± 0.5 |
|||||||
|
Load Capacity (Kgf) |
18 |
|||||||
|
Missed Step (µm) |
1 |
|||||||
|
Parallelism (µm) |
20 |
|||||||
|
Dynamic Straightness (µm) |
4 |
6 |
||||||
|
Dynamic Parallelism (µm) |
10 | 15 | ||||||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / & 28 double shafts |
|||||
|
Brand / Model |
SANYO / SH5285-7211 |
|||||||
|
Driver Brand / Model |
Please refer to reference table |
|||||||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
||||||
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|||||||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
||||||
|
Limit Sensor |
||||||||
|
Origin Approximation Sensor |
N / A |
|||||||
|
Power Voltage |
24V ± 10% |
|||||||
|
Control Output |
NPN open collector output under 24V 8mA |
|||||||
|
Output Control |
Testing (sensing)output transistor OFF (closed) |
|||||||
|
Model No. |
CXC80250-S2PN-CD-P2 CXC80250-F2PN-CD-P2 |
CXC80250-S2PN-CD-P4 CXC80250-F2PN-CD-P4 |
CXC80300-S2PN-CD-P2 CXC80300-F2PN-CD-P2 |
CXC80300-S2PN-CD-P4 CXC80300-F2PN-CD-P4 |
||
|
Mechanical Spec. |
Table Size (mm) |
80 X 80 |
||||
|
Travel Stroke (mm) |
250 |
300 |
||||
|
Drive Type |
Ball screw Ø8 lead 2 mm |
Ball screw Ø8 lead 4 mm |
Ball screw Ø8 lead 2 mm |
Ball screw Ø8 lead 4 mm |
||
|
Rail |
Circular Linear Ball Guiding |
|||||
|
Stage Material / Surface Treatment |
SStainless Steel / Nickel Plating FCarbon Steel / Nickel Plating |
|||||
|
Main Unit Weight (Kg) |
3.08 | 3.38 | ||||
|
Coupling |
FAMCS11.6-5*5 |
|||||
|
Accuracy Level |
PPrecision grade |
|||||
|
Wiring Method |
NGMT Standard |
|||||
|
Precision Spec. |
Resolution (Pulse) (µm) |
4 (Full) 2 (Half) |
8 (Full) 4 (Half) |
4 (Full) 2 (Half) |
8 (Full) 4 (Half) |
|
|
Max. Speed (Full Step) (mm / sec) |
40 |
80 |
40 |
80 |
||
|
Positioning Presion (µm) |
25 |
|||||
|
Repeatability Precision (µm) |
± 0.5 |
|||||
|
Load Capacity (Kgf) |
18 |
|||||
|
Missed Step (µm) |
1 |
|||||
|
Parallelism (µm) |
20 |
|||||
|
Dynamic Straightness (µm) |
6 |
|||||
|
Dynamic Parallelism (µm) |
25 | |||||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / & 28 double shafts |
|||
|
Brand / Model |
SANYO / SH5285-7211 |
|||||
|
Driver Brand / Model |
Please refer to reference table |
|||||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
||||
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|||||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
||||
|
Limit Sensor |
||||||
|
Origin Approximation Sensor |
N / A |
|||||
|
Power Voltage |
24V ± 10% |
|||||
|
Control Output |
NPN open collector output under 24V 8mA |
|||||
|
Output Control |
Testing (sensing)output transistor OFF (closed) |
|||||
| System Configuration Diagram |
|
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor0Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
|
| Axis Definition |
|
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor0driver Reference Table |
|
|
|
|
 |
Malaysia
