Guide-Crossed-roller Guide, In structure, V-groove and crossed roller acquire movement in high accuracy and capacity by linear transmission to act a high precision movement and load capacity performance.
Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
Material-Aluminum Alloy
|
Model No. |
AXYZ100-A2PL-CD |
|||
|
Mechanical Spec. |
Table Size (mm) |
100 X 100 |
||
|
Travel Stroke (mm) |
40 |
|||
|
Drive Type |
Ball screw Ø8, lead 1mm |
|||
|
Rail |
Anti-creep Crossed-roller Guiding |
|||
|
Stage Material / Surface Treatment |
Aluminum Alloy / Black anodized |
|||
|
Main Unit Weight (Kg) |
5.97 | |||
|
Coupling |
FAMMS16-5*5 |
|||
|
Accuracy Level |
PPrecision grade |
|||
|
Wiring Method |
LLeft Wiring / RRight Wiring |
|||
|
Precision Spec. |
Resolution (Pulse) (µm) |
2 (Full) |
1 (Half) |
|
|
Max. Speed (Full Step) (mm / sec) |
10 |
|||
|
Positioning Presion (µm) |
5 |
|||
|
Repeatability Precision (µm) |
± 0.5 |
|||
|
Load Capacity (Kgf) |
11.5 |
|||
|
Missed Step (µm) |
1 |
|||
|
Parallelism (µm) |
20 |
|||
|
Dynamic Straightness (µm) |
2 |
|||
|
Dynamic Parallelism (µm) |
10 |
|||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / & 42 double shafts |
|
|
Brand / Model |
SANYO / 103F5510-8211 |
|||
|
Driver Brand / Model |
Please refer to reference table |
|||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
||
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
||
|
Limit Sensor |
||||
|
Origin Approximation Sensor |
Photoelectric sensor PM-F24 |
|||
|
Power Voltage |
24V ± 10% |
|||
|
Control Output |
NPN open collector output under 24V 8mA |
|||
|
Output Control |
Testing (sensing)output transistor OFF (closed) |
|||
| System Configuration Diagram |
|
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor0Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
|
| Axis Definition |
|
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor0driver Reference Table |
|
|
|
|
Malaysia
