Penerangan
Advanced Technical Copolymer Resinous Bonding Agent.
Bond it is a new inventive technology of ‘Interlocking system’ that permanently binds cement and other cementitious materials on all kind of surfaces.
Single component, water-based with non-toxic and non-inflammable concrete bonding agent with the latest formulated technology containing PVA copolymer and medium viscosity that have been polymerized into resins that are suitable at high humidity exposure.
Suitable for tiling works, plastering works and all kinds of work that involve cementitious materials.
BENEFITS:
' Suitable for all kind of surfaces
' High tensile and flexural strength
' Moisture resistant (wet on wet)
' Ready to use (no dilution or stirringneeded)
' Easy to identify (tinted blue)
' Easy to use (no skilled worker needed)
' Time and cost saving (no hacking or chipping needed)
Recommended For:
- Tiles Installation: Homogeneous tile, Porcelain tile, Wall and Floor Tile, Marble, Granite, Interior and Exterior
- Plastering on all kind of surface: Concrete, Steel, Aluminium, Wood, Glass, PU Waterproofing, Interior and Exterior, etc.
- Floor rendering on all kind of surface: Concrete, Steel, Aluminium, Wood, Glass, PU Waterproofing, Interior and Exterior, etc.
- Rectification work involving cementitious materials: Cement floor thin patching, direct tiling on remaining tile bed, tiles on tiles, covering crack lines without hacking , etc.
Field of use:
*Light blue in colour
*Ready to use product
*Flexible product
*Min and max application temperature
*Open time (1 to 10 days)
*Excellent workability
*Cost effective
*Cement mortal
*Excellent bond strength
*For industrial floors
*Pots life 2 years
*Tile on tiles
*For use in swimming pool(system)
*Fixing on facades
*Keep away from fire
*Keep out of reach of children External wall, Internal wall, Indoor floors, Outdoor floors.
APPLICATION PROCEDURE
Apply a single layer of Bond It™ with paint roller (big or small) onto the sound and cleaned (free from dust, dirt, grease, oil or other contaminations) surface. Leave to dry for approximately 15-30 minutes or until it forms a semi transparent coating. Continue with the desired works (tiling, plastering, patching, rendering, etc.) as normal. DO NOT mix with water or any form of liquid.
Lebih maklumat tentang EKA Hardware Sdn Bhd
Malaysia
