%READY STOCK %TOYOTA EE90 10P 13C 5PK 12V M/CLUTCH MC-8256

An automotive clutch set in a car air conditioning (A/C) system plays a crucial role in engaging and disengaging the A/C compressor from the engine's power. Here's a brief overview of its role, functions, and maintenance:
Role and Functions

1. Engagement and Disengagement: The clutch set allows the A/C compressor to engage (start working) and disengage (stop working) as needed. When the A/C is turned on, the clutch engages, and when it is turned off, the clutch disengages.
2. Power Transfer: It transfers the engine's mechanical power to the A/C compressor when engaged, allowing the compressor to circulate refrigerant through the system.
3. Control: It ensures that the compressor runs only when necessary, which helps in saving fuel and reducing engine load.

• Clutch Plate: Connects to the compressor shaft.
• Pulley: Connects to the engine via a belt and rotates continuously while the engine runs.
• Magnetic Coil: When energized, it creates a magnetic field that pulls the clutch plate to the pulley, engaging the compressor.

1. Regular Inspection: Periodically check the clutch set for any signs of wear, damage, or misalignment.
2. Belt Tension: Ensure the drive belt is properly tensioned to avoid slippage or excessive strain on the clutch.
3. Cleanliness: Keep the clutch and surrounding areas clean from dirt, debris, and oil, which can affect performance.
4. Lubrication: Ensure the clutch bearing is adequately lubricated to prevent friction and wear.
5. Electrical Connections: Check the wiring and connections to the magnetic coil to ensure they are secure and free from corrosion.
6. Professional Servicing: Have the A/C system inspected and serviced by a professional at regular intervals, as specified by the vehicle manufacturer.

1. 接合与分离：离合器组件允许空调压缩机在需要时接合（开始工作）和分离（停止工作）。当空调打开时，离合器接合；当空调关闭时，离合器分离。
2. 动力传递：当离合器接合时，将发动机的机械动力传递给空调压缩机，使其能够循环制冷剂。
3. 控制：确保压缩机仅在需要时运行，帮助节省燃油并减轻发动机负荷。

• 离合器片：连接到压缩机轴。
• 皮带轮：通过皮带与发动机连接，发动机运转时不断旋转。
• 磁线圈：通电时产生磁场，吸引离合器片与皮带轮接合，从而启动压缩机。

1. 定期检查：定期检查离合器组件是否有磨损、损坏或错位的迹象。
2. 皮带张力：确保传动皮带张力适中，避免打滑或对离合器施加过大压力。
3. 保持清洁：保持离合器及其周围区域的清洁，防止灰尘、碎屑和油污影响性能。
4. 润滑：确保离合器轴承有足够的润滑，以防止摩擦和磨损。
5. 电气连接：检查磁线圈的电线和连接是否牢固，且无腐蚀现象。
6. 专业保养：按照车辆制造商的建议，定期请专业人士检查和保养空调系统。