SH1-01470-HFCF

PLU

SH1-01470-HFCF

Power voltage

3Phase 380-460VAC
Voltage continues to fluctuate ±10%, short fluctuation: -15%

Output voltage

3Phase 380-460VAC

Rated output current

147A

Power supply frequency

50/60 Hz fluctuation amplitude ± 5%

Wattage

75KW (100HP)

Power supply capacity

133.4kVA

Carrier frequency range

0.5-10kHz

Setting frequency range

0Hz-590Hz

Input frequency resolution

 Digital: 0.01Hz
Analogue: highest frequency /4000

Display

7-segment LED (5 digits)

Deceleration time

0-3600s

Control method

V/F control (Constant torque, Variable torque, free) automatic gain control
V/f control with encoder (constant torque/reduced/free torque),
Aulomatic boost control with encoder, waterfall sensorless vector control, OHz sensorless vector control,
Cascade style vector control with encoder (position and torque).

Functions

V/f setting (7 points), upper and lower frequency limit, frequency step, acceleration and deceleration curve, manual torque boost, energy saving operation, output adjustment analog, minimum speed, carrier frequency adjustment, motor electronic thermal function, inverter thermal function, frequency input selection, restart pause, various signal output, initialization setting, PID control, automatic shut-off, brake control function, auto-tuning (on/offline), etc.

Input terminal

AI1/AI2: 12bit / 0~10V or 0~20mA, AI3: 12bit/-10~+10V
Multi-speed input: 16 inputs

Output terminal

Transistor output 5, 1c relay output

Communicate

RS485 communication (Ethernet (Modbus TCP/IP), EtherCAT. PROFIBUS DP, PROFINET. DeviceNet, CANopen)

Protection function

Overcurrent error, overcharge error, brake resistor overload, overvoltage error, memory error, undervoltage error, current probe CPU error, external trip error, USP error, ground error, power overvoltage error, error power loss, temperature detection error, cooling fan rotation speed reduction, temperature error, phase input error, IGBT error, phase output error, thermistor error, brake error, low speed range overload error, over inverter load, RS485 communication error, RTC error, etc