Surface Preparation: General / New Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. To have better finish rubbed down surface using suitable abrasive and dust off. If after thorough preparation surface remain powdery, or suffer from alkali attack. For best effect seal with one coat of appropriate Colourland Primer (refer to painting guide). Previously Painted Remove all loose, defective and unstable paint film or powdery residues by thorough brush and scraping. High pressure water jet is highly recommended. Treat areas effected by mould, lichens, algae and moss with Colourland Fungi Wash. Make good minor defects and cracks with suitable Colourland Exterior Brushable Crack Putty.
Lebih maklumat tentang KLS Machinery & Engineering Sdn Bhd
