Micro Hardness Tester

Technical Specifications

Test Pressure                      0.098, 0.246, 0.49, 0.98,

1.96, 2.94, 4.90, 9.80N

Pressure Loading & Unloading       Automatic

Magnification of Microscope         400X (for measuring)

100 X (for measuring)

Pressure Holding Time              5~60s (5 second as input increment)

Minimum Measurable Unit           0.5μm

Maximum Height of Sample         180mm

Maximum Width of Sample          110mm

Main Body Weight approx.           60kg

Power Supply                       AC220V/50Hz

Machine Size (L*W*H)              (490*320*530)mm

Measurement Range                5-2500HV

Standard accessory

Main machine (Including a micro Vicker’s indenter 10X,40X objectives and thermal printer ).

Loading shaft                            1

Weights                                 6

Cross test table                          1

Holder for holing thin sheet                1

Flat edge holder                          1

Fine wire holder                          1

Screwdriver                              2

Horizontal adjusting screw                 4

Power wire                                1

10x micrometer eyepiece                    1

Level                                     1

Spare lamp                            2(6V/12W)

Spare fuse                             2(1A)

Micro Vicker’s hardness block             1 set(1 high, 1 medium)

Qualified product certificate               1

Operation instructions for the product       1