The IDS sensors automatically store their unique serial number and calibration data. In addition, they also digitally process the measurement signal. The IDS sensors can be moved from instrument to instrument and maintain their calibration data and transmit that information to the new instrument.
The FDO sensors can only be used with the MultiLab 4010-1W, MultiLab 4010-2W, and the MultiLab 4010-3W. They can also be used with the MultiLab 4010-1 if the latest instrument firmware has been installed - see the Software and Firmware Downloads page.
Please see the MultiLab Ordering Guide if ordering a complete system, or contact us if you have any questions.
| Accuracy |
Dissolved Oxygen Accuracy: +/- 1.5% of reading Temperature Accuracy: +/- 0.2° |
|---|---|
| Cable Options | Wireless, 1.5 m or 3 m |
| Dimensions |
Cabled version: Sensor Length: 206 mm (8.1 in); Maximum: Diameter: 21.7 mm (0.85 in) |
| Measurement Range |
Dissolved Oxygen Range: 0 to 20 mg/L; 0 to 200% saturation Temperature Measurement Range: 0 to 50°C |
| Operating Temperature | 0 to 40°C |
| Power | Wireless module battery life 9 hours |
| Resolution |
Dissolved Oxygen Resolution: 0.01 mg/L; 0.1% Temperature Resolution: 0.1°C |
| Response Time | 95% in 45 seconds |
| Sensor | Optical, lifetime luminescence detection, green light, not designed for BOD bottles. |
| Warranty |
2 years, 1 year FDO sensor cap |
Malaysia
