The ProDSS features titanium user-replaceable digital smart sensors that are automatically recognized by the instrument when connected and store calibration data.
User-replaceable cables and sensors provide versatility, reduce down time and reduce overall cost of ownership.
The single cable design features universal ports which can accept any 4 sensors plus depth.
Note: The ProDSS conductivity/temperature sensor must be installed in a ProDSS 4 port cable for accurate temperature compensation and measurement of all parameters except turbidity and TSS. All sensors, including conductivity/temperature, must be ordered separately.
| Accuracy |
Temperature - ±0.2 °C Conductivity - 0.001, 0.01 or 0.1 µS/cm (range dependent) Specific Conductance - 0.001, 0.01, 0.1 mS/cm Salinity - 0.01 ppt Resistivity - 0.001, 0.01, 0.1 ohms |
|---|---|
| Equipment used with | ProDSS Handheld and cable assemblies |
| Measurement Range |
Temperature - -5 to 70 °C (temperature compensation range for DO mg/L measurement: -5 to 50 °C )
Conductivity - 0-100 mS/cm: +/- 0.5% of reading or 0.001 mS/cm, whichever is greater. Specific Conductance - 0 to 200 mS/cm Salinity - 0 to 70 ppt Resistivity - 0 to 2 Mohms Seawater Density (Depth Required) - 0.0 to 50.0 sigma, sigma T
|
| Resolution |
Temperature - 0.1 °C or 0.1 °F (user selectable) Conductivity - 0.001, 0.01 or 0.1 µS/cm (range dependent) Specific Conductance - 0.001, 0.01, 0.1 mS/cm Salinity - 0.01 ppt Resistivity - 0.001, 0.01, 0.1 ohms Seawater Density (Depth Required) - 0.1 sigma or sigma T |
Malaysia
