QPS Servo-Motor Automatic Voltage Stabilizer provides a continuous monitoring of the output voltage true RMS by means of an Electronic Control Circuit that compares the instantaneous output voltage with the set value. When changes are detected due to fluctuation of supply voltage or sudden change in load, an electrical signal will be transmitted to the servo-motor which is coupled onto the brush gear of the variable transformer causes the brush gear to rotate until the appropriate voltage is restored. This method of stabilization does not create interference or harmonics in the supply system.
APPLICATIONS:
TECHNICAL SPECIFICATIONS:
|
1-SINGLE PHASE |
Input Voltage |
230Vac ± 15% |
Output Voltage (true RMS) |
230VAC ± 1.5% |
Rated KVA |
1KVA - 30KVA |
Output Waveform / Distortion |
Sinewave / Follow Input |
Response Time |
0.05 ~ 0.07 Sec / V |
Frequency |
50 / 60Hz |
Efficiency |
> 95% |
TVSS Protection (surge) |
Standard |
Over Current Protection |
MCB / MCCB |
Phase Loss Sensing Protection |
Phase Sensing Relay / Optional |
Automatic Output Delay ON System |
Time Delay / Optional |
Operating Temperature |
0°C - 45°C |
SINGLE PHASE AVS MODELS:
Models |
Cabinet |
Power Rated Output (KVA) |
Input Voltage Variation (%) |
Rated/Output Current (A) |
Output Accuracy |
Dimensions (mm) H x W x D |
Weight (Kgs) |
S1 - 2 |
1 |
1 |
± 15% |
4 |
± 1.5% |
260 x 280 x 335 |
12 |
S2 - 2 |
1 |
2 |
± 15% |
9 |
± 1.5% |
260 x 280 x 335 |
14 |
S3 - 2 |
1 |
3 |
± 15% |
13 |
± 1.5% |
260 x 280 x 335 |
21 |
S4 - 2 |
1 |
4 |
± 15% |
17 |
± 1.5% |
260 x 280 x 335 |
21.5 |
S5 - 2 |
2 |
5 |
± 15% |
22 |
± 1.5% |
275 x 260 x 500 |
34 |
S7 - 2 |
2 |
7.5 |
± 15% |
33 |
± 1.5% |
370 x 270 x 560 |
40 |
S10 - 2 |
2 |
10 |
± 15% |
43 |
± 1.5% |
370 x 270 x 560 |
46.5 |
S15 - 2 |
2 |
15 |
± 15% |
65 |
± 1.5% |
370 x 270 x 560 |
54 |
S20 - 2 |
3 |
20 |
± 15% |
87 |
± 1.5% |
640 x 400 x 375 |
64 |
S25 - 2 |
3 |
25 |
± 15% |
109 |
± 1.5% |
640 x 400 x 375 |
75 |
S30 - 2 |
3 |
30 |
± 15% |
130 |
± 1.5% |
640 x 400 x 375 |
83 |