- Contains the latest advanced Hybrid Si02 technology
- Seals paint for long-lasting protection against the elements
- Delivers an extreme water beading action
- Applies like a traditional liquid wax & is easy to use
- Non-whitening on non-painted trim and rubber gaskets
DIRECTIONS:
1. Shake well. Apply to a cool, clean surface in the shade.
2. Dispense a small amount of product onto a foam applicator pad.
3. Spread a thin, even coat onto one panel at a time. Use 7 overlapping paces to ensure complete coverage.
4. Allow 3-5 minutes of cure time before removing. Note: Hybrid Ceramic Wax does not “haze” like traditional waxes.
5. Remove with a premium microfiber towel.
6. Continue until the entire paint surface has been sealed.
MEGUIAR'S HYBRID CERAMIC WAX - IN LIQUID FORM! With all-new, advanced Si02 hybrid technology, you get the benefit of ceramic protection that seals the paint AND it’s as easy to apply as an ordinary liquid wax! Engineered to be applied either by hand or dual action (DA) polisher, this advanced formula produces a slick, protective, water beading
layer that seals your paint from the harsh elements in the environment. Also, since it dries clear it won’t leave any white residue on non-painted rubber gaskets or plastic and vinyl trim pieces. It can even be used on plastic trim & chrome or applied as a top coat over traditional waxesand sealants! It pairs nicely with Meguiar’s Hybrid Ceramic Detailer to maintain the water-beading protection in-between wax applications. Get Hybrid Ceramic Protection that’s easy with no complicated application.
HOW TO PREPARE VEHICLE PAINT BEFORE WAXING For best results, start with a freshly washed vehicle. Always use a pH balanced car wash like Meguiar’s Gold Class Car Wash Shampoo & Conditioner. Next, run your clean, dry fingertips over the paint. If the paint feels rough to the touch, this indicates that you have bonded contaminants on top of your paint. These are things like tree sap mist, industrial fallout, road tar, and paint overspray. Meguiar’s Smooth Surface Clay Kit safely remove contaminants bonded on the paint and leave it as smooth as glass. Finally, evaluate the paint for below surface defects. If you have light to moderate swirls, scratches, oxidation, water spots, or etchings you would want to use a product like Meguiar’s Ultimate Compound. From there, you would follow with a polish like Meguiar’s Ultimate Polish for maximum shine before applying your wax protection
Malaysia
