| project |
content |
| Ordering product number |
EX-C212B |
| model |
EX-C212B |
| Detection distance |
2m |
| Detecting objects |
Opaque objects larger than φ4.5mm |
| Supply voltage |
12V~24V DC±10% / ripple P-P10% or less |
| Current consumption |
Emitter: 20mA or less Receiver: 12mA or less |
| Output |
NPN open collector transistor • Maximum inflow current: 100mA • Applied voltage: 30V DC or less (between output and 0V) • Residual voltage: 2V or less (when inflow current is 100mA) 1V or less (when inflow current is 16mA) |
| Output: Output work |
ON when no light is received |
| Output: short circuit protection |
Equipped (auto recovery) |
| Reaction time |
Less than 1ms |
| Working status indicator |
Orange LED (lights up when output is ON) Receiver equipped |
| Stability indicator light |
Green LED (lights up when light is stable, lights up when no light is stable) Receiver equipment |
| Power indicator |
Green LED (lit when powered) located on the projector |
| Environmental resistance: Protective structure |
IP65(IEC) |
| Environmental resistance: Ambient temperature |
-25℃~+55℃ (no condensation or icing) Storage: -30℃~+70℃ |
| Environmental resistance: operating environment humidity |
35%RH~85%RH, Storage: 35%RH~85%RH |
| Environmental performance: ambient lighting |
Incandescent lamp: 3,000!x or less illumination on the light receiving surface; Sunlight: 10,000!x or less illumination on the light receiving surface |
| Environmental resistance: Withstand voltage |
AC1,000V 1 minute (between all power connection terminals and the housing) |
| Environmental resistance: Insulation resistance |
Between all power connection terminals and the housing, more than 20MΩ, based on a DC250V high resistance meter |
| Environmental resistance: Vibration resistance |
Frequency 10Hz~500Hz · Double amplitude 1.5mm (MAX.10G) X, Y and Z directions 2 hours each (non-powered state) |
| Environmental resistance: impact resistance |
Acceleration 500m/s² (about 50G) 3 times each in X, Y and Z directions (non-powered state) |
| Light projector |
Red LED (modulated) Light emission wavelength: 626nm |
| Installation torque |
0.5N·m or less |
| Material |
Shell: PC+ABS Lens: PC |
| Cable: Type |
0.1mm² rubber cable (emitter: 2 cores, receiver: 3 cores) |
| Cable: Standard length |
2m(Note): When the product model is C05, the cable length is 0.5m. |
| Cable: Cable extension |
Cables with a diameter of 0.3 mm² or more can be extended to a total length of 100 m |
| Weight: Body weight |
Emitter: Approx. 25g Receiver: Approx. 25g |
| Weight: Package weight |
About 50g |
Malaysia
