| SPECIFICATIONS | UNIT | TAD-300 | TAD-400 | ||
| Rated Output Voltage | A | 300 | 400 | ||
| Rated Input Voltage | V | 3 Phase 340V – 493V | 3 Phase 340V – 493V | ||
| Input Source | Hz | 50/60 | 50/60 | ||
| Output Current | Three Phase | TIG | A | DC : 5 ~ 300 | DC : 10 ~ 400 |
| AC : 20 ~ 300 | AC : 25 ~ 400 | ||||
| STICK | A | DC : 5 ~ 250 | DC : 10 ~ 250 | ||
| Output Voltage | Three Phase | TIG | V | DC : 24 | DC : 26 |
| AC : 22 | AC : 26 | ||||
| STICK | V | DC : 30 | DC : 30 | ||
| Input At Rated Load | Three Phase | TIG | KVA/KW | DC : 9.4 / 8.7 | DC : 14.2 / 13.3 |
| AC : 10.3 / 9.5 | AC : 14.2 / 13.3 | ||||
| STICK | KVA/KW | DC : 10.7 / 9.9 | DC : 12.5 / 11.7 | ||
| Rated Duty Cycle (At A.W.S STD) | % | 100% 40°C | 80% 40°C | ||
| Open Circuit Voltage (O.C.V.) | V | DC : 67 | DC : 67 | ||
| AC : 135 | AC : 145 | ||||
| Start Current (Initial Current) | A | DC : 5 ~ 300 | DC : 10 ~ 400 | ||
| AC : 20 ~ 300 | AC : 25 ~ 400 | ||||
| Crater Current | A | DC : 5 ~ 300 | DC : 10 ~ 400 | ||
| AC : 20 ~ 300 | AC : 25 ~ 400 | ||||
| Pulse Current | A | 10 ~ 300 | 10 ~ 400 | ||
| Up Slop Time | Second | 0.1 ~ 5 | 0.1 ~ 5 | ||
| Down Slop Time | Second | 0.1 ~ 5 | 0.1 ~ 5 | ||
| ARC Spot Time | Second | 0.1 ~ 5 | 0.1 ~ 5 | ||
| PRE Flow Time | Second | 0.2 ~ 5 | 0.2 ~ 5 | ||
| Mix Freq | Hz | 0.5 ~ 10 | 0.7 ~ 10 | ||
| Mix AC DC | % | 20 ~ 80 | 20 ~ 80 | ||
| After Flow | Second | 2 ~ 20 | 2 ~ 15 | ||
| Low Pulse | Hz | 0.5 ~ 27 | 0.5 ~ 27 | ||
| MID Pulse | Hz | 7.5 ~ 500 | 7.5 ~ 500 | ||
| Pulse | % | 20 ~ 80 | 20 ~ 80 | ||
| Cleaning ( AC +/-) | % | 20 ~ 80 | 20 ~ 80 | ||
| Crater | - | On / Off - Repeat | On / Off – Repeat | ||
| Remote Control | - | Optional (8M Cable) | Optional (8M Cable) | ||
| Dimension (W*D*H) | MM | 410*510*620 | 410*510*620 | ||
| Weight | KG | 62 | 65 | ||
Malaysia
