The following circuit sections are built onto a single Eurocard, 199x100x12TE with
SMD-technology:
3-phase power supply with smoothing capacitors (-P-)
single phase supply (any phase with the rated voltage, possibly with extra
smoothing capacitance) is possible
fuses for DC-link, ballast circuit and auxiliary power supply
ballast circuit with -w- characteristic
4-quadrant output stage (V-MOS transistors)
auxiliary supply, optionally (solder links) supply from the DC-link
or an external 24 V DC source
2 differential setpoint inputs
input for DC tacho
Enable input
limit-switch inputs positive / negative
integral-off input for driving up to a fixed stop monitoring for actual current value
PI current and speed controller
trimmer potentiometer and fixed components for all important settings
solder links for changing to IxR compensation for optional operation with
tachometer or armature voltage control
24 V logic with electrically isolated optocouplers for the control signals, PLC-compatible
system ready (BTB) relay with floating contact
display LEDs for operational readiness / fault
E15 V auxiliary voltage outputs, 020 mA
Protective and monitoring functions
protected from short-circuit / earth short on the motor connection terminals
monitoring of the operating voltages
temperature monitoring of the output stage
fuse-protection of: ballast circuit, DC-link, auxiliary supply
monitoring of the amplifier and motor
overvoltage protection
Malaysia
