LM Series Sorting Equipment: Pilihan Utama di Johor Bahru (JB), Malaysia SEM Equipment Sdn. Bhd.

Penerangan

Features:

Type: Ferrous and Non-Ferrous base-headed fasteners (sizes M1 to M4, up to 15mm in length)
Production Rate: 600 to 1200 ppm (based on M2-0.4 x 10mm fastener)
Field of View (FOV): 20mm Horizontal x 20mm Vertical
Compliant with US/CE standards.
Camera Configuration: 4-camera maximum; 1 camera for 1000 model.
Lens: Non-telecentric, Standard for the inspection process.

Camera 1: Top-Down View with Adjustable Front Lighting
- Resolution: >0.0005"
- FOV: 20mm (horizontal)
- Key Inspections:
  - Perimeter and open burst cracks
  - Open cracks visible at the outer diameter (OD)
  - Ovality/Roundness of head OD
  - Hex head (no flange) diameter (min/max/avg)
  - Part silhouette for visual inspection
Camera 2: Side View with Backlighting
- Resolution: >0.0005"
- FOV: 20mm x 20mm (square)
- Key Inspections:
  - Length, Head Height, Shank Length
  - Shoulder Diameter (min/max/avg/angle)
  - Point (Pilot) attributes
  - Threads: Major/Minor diameter, Variance, and Thread Match
  - Pattern detection for filled or missing threads
Camera 3 @ 90°: Side View with Backlighting
- Resolution: 0.0014"
- FOV: 20mm x 20mm
- Key Inspections:
  - Turned Head: Side view comparison for hex head width
  - Bolt straightness analysis
  - Detection of features affecting bolt readings

This inspection machine provides a comprehensive and precise solution for quality control in the fastener manufacturing process.