Penerangan
Polyurethane (PU) Sheet
The SYNTHETIC RUBBER PRODUCT polyurethane elastomeric is a new material of polymer synthetic between rubber and plastic. It has both high strength of plastic and high elasticity of rubber.
Its characteristics are:
- a wide range of hardness.
It still has rubber elongation and resilience at high hardness. The polyurethane elastomeric has a hardness range of Shore A10-D80.
- high strength.
At rubber hardness, the tensile strength, tear strength and load carrying capacity are much higher than general rubber material. At high hardness, its impact strength and flexural strength are much higher than plastic material.
- wear-resistant.
Its wear resistance is very outstanding, generally in the range of 0.01-0.10cm3/1.61km, about 3-5 times than rubber material.
- oil resistant.
The polyurethane elastomeric is a highly polar polymer compound which has low affinity with non-polar mineral oil and is hardly eroded in fuel oil and mechanical oil.
- good resistance to oxygen and ozone.
excellent vibration absorption performance, can do damping and buffering. In the mould manufacturing industry, it replaces rubber and springs.
- has good low temperature performance & radiation resistance.
Polyurethane is highly resistant to high energy radiation and has satisfactory performance at 10-10 deg radiation dose with good machining performance.
The polyurethane sheet, pu sheet are made by mould cast or centrifuge rotor with high quality polyester or polyether material. It has very good performance of chemical erode resistant, impermanent resistant, ozone resistant, radiation resistant, ageing resistant, hydrolyse resistant, and high tensile strength, tear resistant, high impact resistant, high bend strength and low compression set etc. The abrasion resistance is 5 multiple more than pure natural rubber, and the oil resistance is 3-5 multiple more than NBR rubber, and has high elasticity 65% with prominent compression resistance at high temperature. wider revised hardness range of 75-95shore A, very good viscidity with metal material, it is a new macromolecule material with fast evolutive now. Apply to military, mine, oil field, chemical, printing, punch, paper making, shoe making, spin, auto industrial etc.
Specifications:
- material: virgin CPU of polyether or polyester
- colour: clear yellow
- surface: smooth/smooth
- tensile strength: 25mpa
- elasticity impact: >25%
- hardness: 75-95shore A
- elongation: 400%-600%
- density: 1.15-1.25g/cm3
- tear strength: 35-155KN/m
- akron abrasion loss:<0.05cm3/1.61km
- compression set (22h*70°C):<10%
- working temperature: 120°C(maximum)
Lebih maklumat tentang RUGAVAL RUBBER SDN BHD
Malaysia
