Fastener Screw | Wall Mounting | Coach Screw | Manufacturer | Supplier

Wall Plug - Hexagon Head Coach Screw
Coach screws are threaded fasteners with a pointed tip and hexagonal or square-shaped head. They are typically used for wood-to-wood or wood-to-metal connections, providing strong grip and pulling power.

All coach screws require a pilot hole, using a general-purpose drill bit such as a twist drill bit, before they are screwed into place, preventing wood splitting. You will need a wood drill bit to drill the pilot hole. They are slightly different from metal drill bits as they have a point at the end to stop them from slipping out of position.

As a rule of thumb, the pilot hole diameter needs to be half the diameter of the coach screw when using softwood and three-quarters when using hardwood. So for example, when inserting an 8mm coach screw, the pilot hole needs to be 4mm for softwood and 6mm for hardwood. Once the pilot hole has been drilled, the coach screw can be driven directly into the wood.

When using coach screws on timber, it is advisable to add a washer to avoid embedding the screw head into the wood on impact. This will also make it easier to remove the screw at any point. Another option is a flanged coach screw. This is a coach screw with an integrated washer built into the head.

We have: M12 x 90mm and M10 x 70mm

Wall Plug - Wedge Anchor Bolt
Wedge anchors consist of two separate pieces that are permanently pre-assembled into a single unit. The first piece is a carbon steel rod that is threaded for a portion of its length. The opposite/installed end of the anchor has a necked-down diameter, or conical space, that tapers outward back to the rod's full diameter.

The second piece of the wedge anchor is a steel slip or sleeve, that is permanently assembled around the conical section of the rod. Each wedge anchor also requires a nut and washer to complete the installation.

Wedge anchors can be used in numerous applications as long as the base material is solid concrete. Unlike many other concrete fasteners, the wedge anchor cannot be used in brick or block.

Material: carbon steel
Heavy loading capacity
Pre-assembled for faster & easier installation
Sleeve design improve holding power
Anti corrosion
Size : M20 x 200mm