Baju Tahan Panas Dan Tahan Api

NewTex suits are used in industries where protection from high heat sources, including steam and hot liquids or vapors, is required. Examples would be refineries, petrochemical plants, foundries and casting plants, basic steel and aluminum industries, glass and ceramic plants, and laboratories. All suits with aluminized ZETEX® outer shell fabric are suitable for exposure to radiant heat up to 2000ºF (1093ºC). ALWAYS have two people suited with Fire Entry, Kiln and Proximity suits to work in relays and to aid each other.

• Insulated suit constructed of Zetex Plus®
• Includes hood, coat, pants, boots, and mitts
• Hood: designed to be used with air mask. Inner drape flame seals Undeararm adjustment straps. Built
• in shell for structural support, hard cap with ratchet headgear
• Speedy clip for hard cap support. Hardened aluminum window frame with two tempered glass lenses, plus two gold plated lenses for thermal protection
• Coat: designed to be used with a breathing apparatus. Double storm fly front. Flame seal with drawstring at coat bottom
• Pants: High waist design, 2'' wide adjustable suspenders, adjustment straps on leg bottoms
• Boots: Designed to fit over work shoes. Rear entry with overlap snap closure and adjustable take
• up straps, insulated wire reinforced sole of flame resistant Neoprene fiberglass riveted to boot cover. All straps and bindings are Zetex Plus®
• Mitts: Heavyweight Zetex Plus® construction
• Application: Our suits are used in industries where protection from high heat sources, including steam and hot liquids or vapors, is required. Examples would be refineries, petrochemical plants, foundries and casting plants, basic steel and aluminum industries, glass and ceramic plants, and laboratories.
  
  Our FIRE ENTRY suit is an essential safety measure for industries dealing with volatile or highly flammable materials. The KILN and PROXIMITY suits are used for maintenance tasks in high heat areas such as kiln or oven maintenance and repair. The Proximity suit, with its double vapor barrier, should be used when steam and volatile materials present an additional hazard. The Kiln suit is suitable for short duration in ambient heat up to 1000ºF (530ºC) and the Proximity suit in ambient heat up to 500ºF (260ºC).