Penerangan
Bearing Separator 75-105mm (4'') ID887798-J007 / ID32172-SB
Designed for removing bearings where there is access behind the bearing
Edges of knife-like design allow removing hard-to-grip parts easily
Bearing Separator has wedge shaped edges for placing puller behind hard to reach bearings, gears, etc., where clearance prevents direct application of grip puller arms.
To use with:
The Bearing Separator should be used with the Cross Bearing Puller.
Bearing separator tools are used with bar puller and legs for a wide variety of pulling jobs.
Pull-out the bearing with the H-type beam and bolts.
Each bearing separator may be used separately or in a combination with a puller.
Applies even pressure for smooth bearing separation and removes gears from the shaft without damage.
Product Description
- CAPACITY: 3'' ~ 4 1/2'' (75-105MM)
- BOLT: 16MM X 165MM X 5/8'' X 18UNF
- BODY THREAD: 1/2'' X 13UNC
*There are options for walk-in purchases.
*We always try to keep the item in stock.
*Knight Auto is the real owner of the above images.
=========================================
Contact Information:
Balakong:
603-89617328 / 603-89623888(whatsapp or call)
Setapak:
603-40219399(whatsapp or call)
Gombak:
603-40318686(whatsapp or call)
Titiwangsa:
603-40319292
Kajang:
017-3691406 / 017-3691038 (whatsapp or call)
Knight Auto Sdn Bhd (Since 1999)(476359-M)
A Wholly-Owned Subsidiary of Lim Seong Hai Capital Berhad
http://www.knightauto.com.my
=========================================
Lebih maklumat tentang Knight Auto Sdn Bhd
Malaysia
