Penerangan
New, unpainted surfaces.
Allow surfaces to cure and dry out at least 28 days. Large cracks must be repaired with
cement: sand mix and rendered smooth. Make good all minor defects with appropriate
fillers. Remove all loosely adhering residues by thorough brushing.
Repainting
Check for powders or chalk. These surface contaminants must be completely removed by
washing with warm water and detergent solutions. Rinse with clean water, taking care to
change the rinsing water regularly. If after thorough preparation the surface is still slightly
powdery it may be necessary to seal it with PAR Plasterseal DPP1001 Solvent Based Wall
Sealer. Dilute the sealer up to 30% and apply liberally to allow the sealer to fully penetrate
the surface and form a barrier that seals up the chalk.
Safety & Health
-
Ensure adequate lighting and ventilation during application and drying.
-
This product does not contain added lead or mercury.
-
When applying paints, it is advisable to wear eye protection.
-
In case of contact with eyes, rinse immediately with plenty of water and seek
medical assistance.
-
Use soap and water to remove splashes from skin.
-
Storage: Keep container closed and store in clean, dry conditions.
-
Do not empty into drains or water courses.
-
This product is not flammable. Keep out of reach of children.
-
Chemical Safety Data Sheet (CSDS) is available upon request.
Lebih maklumat tentang Velocitydiy Concept Store Sdn Bhd
