[ NIPPON PAINT ] 5400 Exterior Sealer Acrylic Water Based Sealer (5L)

Description

5400 Exterior Sealer is a styrene acrylic water-based wall sealer that is specially formulated for exterior walls. It has good hiding, low odour and provides good protection against efflorescence and alkaline.

Features

• Low VOC
• Low odour
• Good alkaline & efflorescence resistance

Specifications

• Paint Type: Water-based
• Product Type: Exterior
• Finishing: Matt
• Recommended Substrate: Masonry, brick, plastering substrate and fibre board

Surface Preparation

Remove all loose, defective paint or powdery residues, loose chalk, dust and foreign matter. Repair cracks, uneven surfaces with suitable fillers. Smoothen the filler areas with sand paper. Surfaces to be painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.) Pair this sealer with any product from the Nippon Paint exterior range

Safety Precautions

• Keep container tightly closed and keep out of reach children or away from food and drink.

• Ensure good ventilation during application and drying.

• When applying paint, it is advisable to wear eye protection.

• In case of contact with eye, rinse with plenty of water immediately and seek medical advice.

• Remove splashes from skin by using soap or water.

• Paint must always be stored in a cool place.

• When transporting paint, care must be taken. Always keep container in a secure upright position.

• Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations.