High Pressure Fuel Filters Water Separator

High Pressure Fuel Filters Water Separator

Kategori: Engine Fuel Filtration Stok Habis
Boleh Dibeli di Laman Web Rasmi
Untuk maklumat lanjut, lawati laman web rasmi kami di hinsitsu.com.my

Penerangan

110A Series

Diesel/Gasoline High Pressure Cartridge Fuel Filter/Water Separator


The 110A fuel filter/water separator may be installed on the vacuum or pressure side of a fuel pump (up to 100 psi /6.9 bar) with a maximum flow rate of 15 gph (57 lph) for diesel fuel and 35 gph (132 lpm) for gasoline. The compact size and four port versatility make the 110A a popular fuel filter/ water separator for small engine applications.  The filter features 1/4˝- 18 NPTF (SAE J467) inlet and outlet fuel ports and a unitized mounting bracket.  Its two piece, powder-coated die-cast aluminum construction ensures a long-lasting, durable particulate and water removing filter.  Servicing is also made easier by the spin-on bowl assembly and simple cartridge filter changeout procedure.

The 110A Series is a two piece all aluminum design with a cartridge type filter element.  Servicing is accomplished by spinning off the bottom bowl from the mounting head.  Collected water is drained from a ½”-20 UNF bolt.  Inlet and outlet ports are available on either side of the unit.  Fuel enters the inlet and travels inside-out through the cartridge filter assembly.  Any collected water falls down through the center of the element while fuel exits through the filter to the outlet.

Product Features:

• 100 psi /6.9 bar operating pressure or can be used on vacuum side of pumps.
• 4 port (1/4˝- 18 NPTF (SAE J467)), die-cast aluminum unitized head
• Mounting holds spaced at 1.4" (35.6 mm), for 1/4" bolt
• 2 piece powder-coated aluminum construction
• Filters gasoline, diesel, and gasoline/oil blended fuels
• Flow rates up to 35 gph (132 lph) with gasoline applications
• Flow rates up 15 gph (57 lph) for diesel fuel application
• Certifications: ABYC, NMMA type accepted, UL listed
• Compact design
• Heavy duty construction
• Easy to service



Performance Characteristics
Series Type Cartridge FF/WS
Brand Racor
Series 100
Mounting Holes 1.4" (35.6 mm) spaced, for 1/4" bolt
Flow Rate (gph) 15 gph in diesel, 35 gph in gasoline
Flow Rate (lph) 57 lph in diesel, 132 lph in gasoline
Micron Rating 10
Port Size 1/4"-18 NPTF (SAE J476)
Number of Ports 4
Media Aquabloc®
Replacement Element R11S = 2 micron
R11T = 10 micron
Material Powder Coated Die-cast aluminum
Width (inch) 3.2
Width (cm) 8.1
Height (inch) 6
Height (cm) 15.2
Depth (inch) 3.2
Depth (cm) 8.1
Weight (lb) 1.3
Weight (kg) 0.59
Element Removal Clearance Below 2.1 inch (5.1 cm)
Working Pressure Maximum (psi) 100
Working Pressure Maximum (bar) 6.9
Clean Pressure Drop (psi) 0.15
Clean Pressure Drop (kPa) 1.03
Maximum Air Inlet Temperature (F) -40 to +250
Maximum Ambient Temperature (C) -40 to +121
Options Water in Fuel Detection available separately

Lebih maklumat tentang Hinsitsu Auto Parts Sdn Bhd
Hinsitsu Auto Parts Sdn Bhd
Hinsitsu Auto Parts Sdn Bhd Shield-Star Filter Supplier Selangor, Port Klang, Industrial Filter, Tractor Filter Supply Kuala Lumpur (KL), Malaysia ~ Hinsitsu Auto Parts Sdn Bhd