Tenmars TM-604 3 Phase/ Motor Rotation Tester

TM-604  3 Phase/ Motor Rotation Tester

• Display by LED indicators.
• Low battery detection.

Application

• Phase sequence testing. Three phase motor installation and maintenance.
• Check motors for rotation direction.
• Identifies the phase sequence of three phase electrical systems.
• Indicates normal or reversed phases as well as loss of phase.

Features

• Check the 3 wires of the power cord, L1, L2 and L3 through the 3 red lamps, which indicate if each wire is connected well.
• Check if L1, L2 and L3 are in place, the 3 motor wires, the motor’s direction of rotation, and the ER red/green OK indicators.
• When the battery is low, an indicator will turn ON to remind you to replace it.
• Hold the power button and check the panel indicator.

Specifications

• Overvoltage category : CAT IV 600V, CAT III 1000V.
• Inter phase voltage : 45 to 600V AC. 
• Signal Frequency Range : 45 to 400 Hz. 
• Test Currents (In per phase) less than : 3.5 mA 
• Motor POWER：6W~160W
• Dimension: 143mm(L)x68mm(W)x35mm(H).
• Weight:about 150g. (Including battery)