The LC60Dx is actually easily interchangeable between CMMs and handheld localizers. As such, companies owning both fixed-bed CMMs and articulated arms can benefit from using a single LC60Dx scanner on both systems. In this way, they are able to execute most of the digitizing work using one scanner and compare e.g. measuring results from metrology room (CMM) and shopfloor (articulated arm).
Key benefits:
| Probing error (MPEp)1 | 9 μm (0.0004”) |
|---|---|
| Ball bar length (MPEE)2 |
6+L/350(µm) (0.00024+L/350) (') |
| Multi-stylus test (MPEAL)3 | 9 μm (0.0004”) |
| ISO Probing form error4 | 20 µm (0.00079”) |
| ISO Probing size error all5 | 30 µm (0.00118”) |
| ISO Probing dispersion value6 | 36 µm (0.00141”) |
| ISO Cone angle7 | 125° |
| Stripe width | 60 mm (2.36”) |
| Scanning speed | 75,000pts/s |
| Resolution | 60μm (0.0024”) |
| Stand-off distance | 95 mm (3.74”) |
|
Field-of-View (FOV) width and height |
60x60 mm (2.36x2.36”) |
| Weight | 390 g (0.86 lbs) |
| Interface on manual localizers | Ethernet |
| Laser safety | Class 2 |
| Enhanced Scanner Performance | ESP3 |
| Daylight filter | yes |
| Probe head compatibility | PH10M, PH10MQ, CW43, PHS |
All accuracy specifications valid for a CMM with an accuracy of 2µm + L/350 or better using manufacturer supplied test sphere
1Nikon Metrology test comparable to EN/ISO 10360-2 MPEP using 1 sigma sphere fit.
2Nikon Metrology test comparable to EN/ISO 10360-2 MPEE
3Nikon Metrology test comparable to EN/ISO 10360-5 MPEAL
Accuracy specifications according ISO 10360-8:2013:
4PForm.Sph.1x25:Tr:ODS,MPE : Maximum probing form error using 25 representative points in translatory scanning mode
5PSize.Sph.All:Tr:ODS,MPE : Maximum probing size error All using all measured points in translatory scanning mode
6PForm.Sph.D95%:Tr:ODS,MPL : Maximum probing dispersion value using 95% of the measured points in translatory scanning mode
7Cone angle : Region of sphere on which the measured points are selected
Malaysia
