The Sandblaster is designed for cleaning, polishing, and finishing of SLS 3D printing object,
using dry Abrasive Material.Thanks to some compressed air and little glass balls (Abrasive Material)
using Sandblaster you can penetrate all of the corners of your model and highlight every detail.
The process is clean and easy:
Post-processing of SLS printed parts is an easy task. You don’t need to remove any supports,
neither mechanically nor chemically. All you need to do is to get rid of spare powder connected
to your printed parts. The best and cleanest method is to use compressed air and a sandblaster.
With this device you will clean and polish the surfaces.
Type Manual
Working area 410 x 310 x 200 mm (16.1 x 12.2 x 7.9 in)
Max. pressure 0.86 MPa / 125 psi
Coupling DN 7.2
Max. abrasive material capacity 4.5 kg (9.9 lbs)
Dimensions 480 x 370 x 360 mm (18.9 x 14.5 x 14.1 in)
Weight 15 kg (33 lbs)
Illumination power 6 W
Illumination Input voltage 230 V / 50 Hz or 120 V / 60 Hz
Abrasive material glass balls 200 μm
Required Air flow 300 L/min
Required Pressure 0.6 – 0.86 MPa (87 – 124.7 psi)
*There are options for walk-in purchases.
*We always try to keep the item in stock.
*Knight Auto is the real owner of the above images.
=========================================
Contact Information:
Balakong:
603-89623888(whatsapp or call)
Setapak:
603-40219399(whatsapp or call)
Gombak:
603-40318686(whatsapp or call)
Kajang:
Knight Auto Sdn Bhd (Since 1999)(476359-M)
A Wholly-Owned Subsidiary of Lim Seong Hai Capital Berhad
http://www.knightauto.com.my
=========================================
Malaysia
