OVERVIEW
• Advanced DRO microwave sensor
• 3D lens with no blind detection spot
• Second-to-none look down detection
• Motion signal discretion technology
• Intelligent pulse count PIR detection
• Superior RFI & EMI protection
• Adjustable microwave detection range
• Temperature compensated PIR sensor
• Fluorescent light interference filter
DP-150 is a reliable PIR+MW dual technology motion detector designed for professional intrusion detection. This high quality motion detector combines a dual element, pulse count PIR sensor and a Doppler microwave radar sensor into a slim, compact housing. The alarm signal is generated only when intrusion is detected by two different sensors at the same time, therefore the detection reliability is higher than the detectors with single technology.
DP-150 can protect the area up to 15 m long and 110 degree wide.
For security system requires reliable intrusion detection to the common area, DP-150 is an ideal choice.
Specification:
| Power supply |
9~16 VDC, 12 VDC typical
|
| Current drain |
30 mA, @12 VDC
|
| Infrared sensor |
Dual element, high sensitivity, low noise
|
| Microwave sensor |
DRO type, patch antenna
|
| Alarm period |
1.5 ~ 2.5 sec.
|
| Detection angle |
110 degree wide
|
| Detection range |
15 m @25
 C |
| Mounting height |
2.0~2.4m, 2.4~3.6 m with bracket
|
| Alarm output |
NC, 0.2 A, 30 VDC
|
| Tamper |
NC open trigger
|
| Pulse count |
1 / 2 / 3, selectable
|
| Temperature |
-10°C~50°C (14°F~122°F)
|
| Dimensions |
125 x 68 x 42 mm
|
