BATTERY POWERED MAGNETIC FLOW METER FOR LIQUID (ALMAGBAT) : Pilihan Utama di Malaysia VG Instruments (SEA) Sdn Bhd

Specifications

Sizes: 1/2" - 24" (15-600mm)
Accuracy: ±1% of reading
Liquid Conductivity: must be ≥ 20 μS/cm
Temperature: -40-300°F (-50-150°C)
Liners: Neoprene, PTFE, PFA, F46 Ceramic, Hard rubber
Electrodes & Grounding: SS #316L, Hastelloy C, Nickel, Titanium, Ceramic
Process Connection: Wafer type & flanged - ANSI, DIN, JIS, & Sanitary
Application: Water, Wastewater, Power, Chemical, Food/Beverage, Factory Automation

Penerangan

SmartMeasurement’s ALMAGBAT is a battery powered magnetic flow meter mainly used in water applications. The ALMAGBAT’s display/converter module is equipped with a replaceable lithium battery that can be used for up to three years of continuous operation. The operation period can be extended by using a high-capacity battery instead of our standard lithium battery.

Remote communication with this battery powered mag meter can be achieved via a base-station-type radio communication network system. With a centrally located base station, the coverage radius can be up to 1000 meters. Base stations within a close proximity (SRD mode), may operate on 928 MHz frequency. For greater distances, GPRS or CDMA mobile network communications can be used to transmit data to any central office.
The ALMAGBAT comes standard with a rugged IP68 die-cast aluminum enclosure, which allows the device to be used in both indoor and outdoor applications.

Features

Available in ¼” – 24″ (3-600 mm) line sizes
Will measure a wide range of fluid velocities; 0-50 feet/sec (0-15 m/s)
GPRS, CDMA and SRD radio communications available
Conductivity of measured medium: ≥ 20 μs/cm
IP68 enclosure; suitable for underground applications
Available FEP liner suitable for vacuum applications
Excellent accuracy; ±0.5% of reading
Empty pipe, current excitation and remaining battery life alarms
NIST traceable calibration certificate

Specifications

Sizes:	3-600mm ( to 24″)
Measuring Range:	0 – 0.8 fps (0.25 mps) min.; 0 – 50 fps (15 mps); bi-directional0 – 15 mps (39 fps) – bi-direction
Temperature:	15~175 °F (-10~80 °C) – Polyurethane / -4~158 °F (-20~70 °C) – Neoprene / -40~300 °F (-40~150 °C) – FEP / -40~300 °F (-40~150 °C) – PTFE-20 ~ +70 Dec C (Neoprene)-40 ~ +150 Deg. C (FEP)
Accuracy:	±0.5% of reading (Velocity>=0.5 m/s) / ±0.0025 m/s(Velocity < 0.5 m/s) / ±0.2% of Reading±0.0025 m/s(Velocity < 0.5 m/s)±0.2% of Reading
Liners:	Polyurethane – 1″~24″ (25~600 mm) / Neoprene – 2″~24″ (50~600 mm) / FEP – ”~12″ (3~300 mm) / PTFE – 1″~24″ (25~600 mm)
Material :	SS #304 flow tube, carbon steel flanges & coil housing, powder coated aluminum electrical enclosure
Conductivity:	must be ≥ 20 μS/cm
Electrode & Grounding:	Stainless Steel #316L / Hastelloy B / Hastelloy C / Titanium / Tantalum / Platinum -iridium alloy
Protection:	IP 68
Battery Life:	Up to 66 months Note: Battery life depends on flow meter size and/or sampling time (either every 15 or 30 seconds)
Ambient temperature:	-13 to 140 °F (-25 to 60 °C)
Cable entry:	2 X PG11
Resistance excitation:	Coil: 100~120 Ω (two in series) / Coil : 30~50 Ω (two in series) -optional
Outputs:	Pulse, RS485
Power requirements :	250mA excitation (convertor)

Refer to the link for more details: https://www.smartmeasurement.com/almagbat/

Lebih maklumat tentang VG Instruments (SEA) Sdn Bhd