Description
Features and Benefits
This form-in-place anaerobic-curing gasketing sealant provides high temperature and chemical resistance on close fitting, rigid machined metal flanges.
LOCTITE® 510 is a high-temperature resistant, form-in-place anaerobic-curing sealant, which forms an instant, low-pressure seal when confined in the absence of air between close fitting metal surfaces. Ideal for rigid flanges, especially in transmissions and motor casings. Unprimed gap-fill is 0.25 mm (0.01''). Recommended for use with aluminum and steel substrates.
-
For close fitting, rigid metal flanges
-
Temperature resistant up to 204°C (400°F)
-
Adapts to surface irregularities and scratches up to 0.25mm (0.01'')
-
Increases torque capacity of assembled flanges
-
Registered to NSF Category P1
Technical Information
|
Application method |
Dispense system, Manual, Screen printing |
|
Applications |
For close fitting parts, For high temperature applications, Rigid assembly gasketing, Sealing |
|
Chemical basis / base |
Dimethacrylate ester |
|
Color |
Pink |
|
Cure type |
Anaerobic cure |
|
Fixture time, Steel |
25.0 min. |
|
Gap fill, Unprimed |
0.25 mm |
|
Key characteristics |
Chemical resistant, For machined, rigid flanges, Strength: medium strength, Thixotropic |
|
Number of components |
1 part |
|
Operating temperature |
-65.0 - 400.0 °F (-55.0 - 200.0 °C ) |
|
Physical form |
Gel |
|
Recommended for use with |
Metal: aluminum, Metal: steel |
|
Storage temperature |
8.0 - 21.0 °C |
|
Viscosity, 20 RPM |
90000.0 mPa·s (cP) |
More detail about Aerochem Industries Sdn Bhd
Malaysia
