(MICHAUD) Network Insulation Piercing Connector

APPLICATION

This connector is used to establish the tap connection from a low voltage A.B.C. (Aerial Bundled Conductors) network to another network of the same type.
 
DESCRIPTION

Connector end cap:

• The connector end cap is flexible so that to feel good tap conductor insertion simply by hand.
• It is carrying membranes instead of grease, granting watertightness around tap conductor end on long terms basis.
• It is glued on connector body so that to avoid eventual loss during handling, installation and environment (wind, wild life...).
• It can be equipped with a hard end cap, gripping and covering so, in case rigid cover is required.

 
Connector general features:
 

• Insulation piercing is carried out on the main and tap conductors simultaneously.
• The dielectric strength in water is greater than 6kV.
• The tightening screws are potential free.
• Tightening efficiency is ensured by shear head screws.
• This connector meets the criteria of NF C 33-020 and EN 50-483.

Certificate of Product Acceptance:

• Based on the assessment by TNB Labs Sdn Bhd. , the above equipment has complied with the specified requirements of TNB Technichal Specification and is hereby accepted for use in the TNB system.