PE Tubing: Top Choice in Selangor, Malaysia, Kuala Lumpur (KL), Puchong Tecoline Sdn Bhd

Description

-Poly tubing is manufactured from F.D.A. approved resins. It has very low moisture adsorption. It is fungus resistant, non-corrosive,and highly resistant to stress crack. It is suitable for air and water application and us used for beverage and soda transfer.It is available in 2 types, low and high density. Low density provides flexibility and high density, while not as flexible, has a higher temperature and pressure rating. All sizes of low and high density are stocked in natural colors.

Note :The working pressured listed for the nylon tubing is rated at +70°F. Any ambient or internal increase in temperature will lower the above listed working pressures.These tubing are not recommended for milk contact.

Color : Black, Blue, White

Application :

∙ Piping in pneumatic

∙ Central lubrication systems

∙ Air conditioners

∙ Painting machines

∙ Piping in ship (air pressure control, oil or water gauge piping)

∙ Air Piping in automatic control panels

∙ Automobiles (Car air conditioner grease piping)

∙ Agricultural chemical spray machines

∙ Chemical plant (automatic control, instrumentation signal.)

Stock Code	Sizes	Std Lgth(M)	ID(mm)	OD(mm)	W/P (psi)
PE-4	4MM	100	2	4	130
PE-6	6MM	100	4	6	140
PE-8	8MM	100	6	8	155
PE-10	10MM	100	7.5	10	135
PE-12	12MM	100	9	12	100
PE-1/8	1/8″	100	0.093	1/8″	130
PE-1/4	1/4″	100	0.179	1/4″	140
PE-5/16	5/16″	100	0.236	5/16″	155
PE-3/8	3/8″	100	0.275	3/8″	135
PE-1/2	1/2″	100	0.380	1/2″	130

More detail about Tecoline Sdn Bhd