EPX180NE Dry pump 400V MCM TIM 1/4 water connectors A41944724

EPX180NE Dry pump 400V MCM TIM 1/4 water connectors A41944724

Category: EPX180NE Dry Pump Available
For more information, visit our official website at glovac.com.my

Description

Overview:
The EPX series uses a unique, patented, single-shaft regenerative/Holweck® stage mechanism that makes them capable of pumping from atmosphere to ultimate pressures of < 1x10-4 mbar or < 1x10-6mbar depending on model. They are ideal for applications where a better base pressure is required than can be delivered by a typical primary pump and where otherwise a turbomolecular pump and primary pump would be required and also for applications that cycle frequently from atmosphere to low pressures as they can operate continuously at all inlet pressures.

Features & Benefits:
Compact footprint – the EPX is more compact than the equivalent turbomolecular pump and primary pump combination. 
Low cost of ownership – zero routine maintenance with a 5 year service interval. 
Unique patent protected pumping mechanism – the EPX can pump down from atmosphere to turbomolecular base pressure and can operate continuously at all inlet pressures. No separate “rough pumping” required. 
Ultra clean mechanism – EPX pumps have no grease or oil under vacuum and present no other source of potential contamination. 
Extremely reliable – based on field proven IPX technology, the EPX has a MTBFp = 13 years (SEMI E10) with service periods of around every 5 years to maximize the life of the pump. 
Water cooled – low environmental heat load 
Low noise and vibration – better working environment. Ideal for vibration sensitive environments.

​Technical Data:

Peak speed 170 m3h-1
  105 ft3min-1
  2835 lmin-1
Ultimate vacuum  
  <1 x 10-4 mbar
  <7.5 x 10-5 Torr
  <1 x 10-2 Pa
Warm-up time (to nominal performance) 30 min
Inlet flange ISO63
Outlet flange NW25
Noise <59 dB(A)
Minimum cooling water flow rate 2 lmin-1
Cooling water temperature 15 – 35 °C
Nitrogen supply interface 1/4 in (6.5 mm) tube
Nitrogen supply pressure 3 x 105 – 7 x 105 pa
Minimum nitrogen purity 99.95%
Electrical Supply 400 V, 50/60 Hz 3 phase
Power at ultimate 1.4 kW
Rated motor power 3.0 kW
TIM None
Weight 43.5 kg

More detail about Glovac Sdn Bhd
Glovac Sdn Bhd
Glovac Sdn Bhd EDWARDS:: Industrial Pump Kuala Lumpur (KL), Chemical Pump Supplier Selangor, Industrial Vacuum Distributor Malaysia ~ Glovac Sdn Bhd
Contact Us flagMalaysia